Is United States the default delivery country? Otherwise, please select your delivery country or log in directly with your account.
Four-piece spacer set incl. 2 mm, 5 mm, 10 mm and 20 mm spacer. Suitable for 1 1/8 inch stems.
Jockey wheels for Shimano Ultegra, XT and Saint 9-/10-speed. Set of guide- and tension pulley.
Serious upgrade protects SRAM MTB carbon cranks from surface damages.
ESI Silicone Tape has elastic, self-bonding and hi-temp properties.
Replacement core for Stan's presta valve stems and presta valve equipped rim strips.
Shimano jockey wheels for XT RD-M8000 rear derailleur (11-speed). With 11 teeth. Set consists of guide- and tension pulley.
Film set for frame protection against chipping and scratching. It is very resistant to aging, does not yellow and is virtually invisible. 14 safety stickers.
Adapterset to mount carriers on frames with no eyelets at the seat stays.
Jockey wheels with 11 teeth for Shimano 9/10-speed and Campagnolo 11-speed.
Shimano tension and guide pulley set for Ultegra RD-6800 11-speed derailleur. With 11 teeth. Set consists of guide- and tension pulley.
For using 8-/9-speed road and 8- to 11-speed MTB cassettes at 11-speed road freehub bodies.
Neoprene Chainstay Protector with Velcro closure.
Adjustable cable stopper fits to all frames with a round down tube.
KCNC jockey wheels made of hard anodized 7075 aluminium.
1.0 mm spacer for the use of 10-speed (road) cassettes at 8- and 9-speed freehub bodies.
Lightweight 1 1/8" aluminum ahead cap. Inclusive aluminium screw (M6x35).
Jockey Wheels for Shimano Ultegra, XT and Saint 9-/10-speed. With 11 teeth. Set consists of guide- and tension pulley.
Veloplugs replace rim tape! They are lighter, simplify the assembly of tube/tire and can be reused many times. Available in two sizes.
Shimano SM-SP18-M cable routing for mounting under the bottom bracket. Screw fastening.
The first choice to tighten and secure the headset without a star nut, with aluminium cap and -bolt.
Light carbon spacer made by Tune. Available in various heights. For 1 1/8 inch.
Shimano tension and guide pulley set for 105 RD-5800-GS 11-speed derailleur. With 11 teeth. Set consists of guide- and tension pulley.
Cassettes spacer made of aluminium. Available in different versions.
With these steel washers you can assemble your pedals on aluminum and carbon cranks with the recommended torque. They effectively protect the crankarms against damage.
High-quality cnc machined aluminium bar end plugs to customize your mountain bike.
High-quality bottle cage screws M5x12, made lightweight and durable 7075 T6 aluminium.
Light-weight bottle cage torx bolts (M5x12) made of 7075 aluminium with round-heads.
Chainring bolts for Shimano XTR FC-M970 / Dura Ace FC-9000 / Ultegra FC-6800 crankssets. For direct mount of the chainring on the crank arm. M8 x 10,1 mm / M8 x 7 mm.
Just like the compressor pro, except that it's made completely of aluminium. For 1 1/8 inch steerer.
With these 2 mm aluminum spacers you can convert a 2-speed crank to singlespeed. They take place between the chainring and the nut.
Chainring bolts made of anodized aluminium f. 2-speed chainrings. Set of 5 bolts & 5 nuts.
Light and stiff - the Syntace H.A.T. Spacer for VRO and conventional stems.
Hope Ahead cap made of 7075 aluminium for 1 1/8 inch steerer. Available in different colors.
Light weight chainring bolt set, made of 7075 T6 aluminium. According to the manufacturer these bolt set is especially recommend for Rotor cranksets in connection with Rotor chainrings.
Protects your bike from scratches and stone-chipping.
Micro Spacer to compensate the bearing seat within the headtube and to prevent the dust cover from getting stuck.
Replacement chainring bolts M8.5 made of steel, for singlespeed and tandem cranks. Thread length 7 mm, nut length 9 mm. Delivery includes 5 bolts, 5 nuts and shims.
Ultra lightweight 1 1/8 carbon spacers. Set of 4 spacers: 2x5mm, 1x10mm, 1x15mm.
The first choice for carbon and damageable aluminium steerers. Replaces the claw nut and does not harm the steerer tube. For forks with 1 1/8" carbon and aluminum steering tubes.
KCNC jockey wheels made of hard anodized 7075 aluminium with durable ceramic bearings.
Light-weight bottle cage bolts (M5x15) made of 7075 aluminium. Perfect to tune your bike right down to the last detail. Available in different beautifully anodized colors.
This lightweight aluminium bolt provides a weight optimization for Shimano road bike and MTB Hollowtech2 cranksets. It is necessary for optimal bearing clearance adjustment.
Chainstay protector set made of glass fiber to stick on.
Puncture resistant neoprene makes these chainstay protectors extremely durable.
One piece bolt top cap for 1 1/8 inch and tapered headsets. Only 4 grams.
Ultra-lightweight 1 1/8 aluminum spacers. Set of 4 spacers: 5mm, 10mm, 15mm, 20mm.
Shimano jockey wheels for XTR RD-M9000 / RD-M9050 rear derailleur. With 11 teeth. Set consists of guide- and tension pulley.
Deda style in every detail. High quality and lightweight CNC machined aluminum ahead cap in flat design.
Ultra lightweight 1 1/8 carbon spacers. Set of 4 spacers: 5mm, 10mm, 15mm, 20mm.
Chainring bolts for Shimano Deore XT FC-M8000 cranksset. M8 x 9 mm / M8 x 11 mm.
Please use the following characteristics in order to narrow down your product results.
Continue by clicking "use filter" to carry out the filter