This tool accurately presses headset cups 1”, 1-1/8”, 1-1/4 ” and 1-1/2” into head tubes. In addition it has a longer spindle for BMX headsets with larger tubing.
The design of the offset cone wrench enables working in difficult hard to reach places. This unique design is suitable for assembly and disassembly of nuts on Sun Tour headsets.
To use, remove the wheel and insert the tool into the frame. This tool is used for the alignment of the rear triangle and dropouts.
Professional tool for exact derailleur hanger alignment. The derailleur hanger and the rear derailleur, must be parallel to the rear wheel.
Tool is used for removing old bushings from the rear shock. With use of this tool and a vice, removal of the bushing is incredibly easy. Supports bushings with diameter 12 mm and diameter 12,7 mm.
The Tool is intended for installation of fork dust seals on front fork suspension. Based on the seal dimension the appropriate version of the tool is used - 30 mm, 32 mm, 34 mm, 35 mm/36 mm or 40 mm.
Flat sockets are used on a bicycle suspension fork where the top nut has a very low profile. Available in different diameter.
Tool is used for servicing bicycle suspension. With its smooth rubberized strap you can grab any kind of smooth and sensitive surface, like shock or fork sliders.
Unior's suspension service set includes the most popular professional tools for servicing forks and shocks, all nicely arranged in a SOS tool tray and stored in a compact box.
Hexagonal Wrench for Suntour and RST Forks. 5 mm and 6 mm hexagonal wrench.
Please use the following characteristics in order to narrow down your product results.
Continue by clicking "use filter" to carry out the filter