The RESET Pressfit 24 bottom bracket is equipped with deep groove ball bearings and completely sealed. Completely dismountable. Suitable for Hollowtech II cranks & frames with 68 mm PF30 housing.
Recommended retail price***: 129,00 €.
This bottom bracket combines normally incompatible cranks and frames, accepting 24mm cranks (Shimano Hollowtech II, Raceface X-Type) and fitting inside 46mm diameter BB shells (PressFit 30)
Recommended retail price***: 119,00 €.
Recommended retail price***: 109,00 €.
This adapter kit allow for the use of external bottom bracket crankarms with 24mm spindles (Shimano Hollowtech II, Raceface X-Type) with newer BB30 and PressFit 30 bottom bracket bearings.
Recommended retail price***: 61,90 €.
The Problem Solvers GXP adapter kit is made specifically for use with the Problem Solvers BB30/PressFit 30 Adapter kit (CR0096) or the Problem Solvers Eccentric 46 Bottom Bracket (CR0098).
Recommended retail price***: 48,90 €.
This adapter set allows the use of SRAM / Truvativ cranks with 22 / 24 mm GXP hollow axle and ACROS bottom brackets for 24 mm hollow axles.
Cannondale BB30 bottom bracket with special 104 mm spindle QC850/ for SRM powermeter use on Hollowgram Si road cranks.
Cannondale BB30 bottom bracket with 104 mm spindle QC690/ for Hollowgram Si road cranks.
Spare cover suited for FSA 24 mm MegaExo bottom brackets BB-6/7/8/9000.
These BB30 spacers provide adjusting of any "side play". They are required when the BB30 specification is not matched correctly by the frame builder.
Please use the following characteristics in order to narrow down your product results.
Continue by clicking "use filter" to carry out the filter