This bottom bracket combines normally incompatible cranks and frames, accepting 24mm cranks (Shimano Hollowtech II, Raceface X-Type) and fitting inside 46mm diameter BB shells (PressFit 30)
Recommended retail price***: 109,00 €.
Eccentric bottom bracket suited for PressFit 30 frames with 46 mm diameter bottom bracket shells and 24 mm crank spindles. Offers 16mm of fore-to-aft adjustment to properly tension your chain.
Recommended retail price***: 189,00 €.
The Problem Solvers Up-Cup #54 replaces the plastic non-drive side bottom bracket cup of Shimano UN54 square-taper bottom brackets. Use the Up-Cup to replace broken cups or upgrade from the original.
Recommended retail price***: 25,90 €.
This adapter kit allow for the use of external bottom bracket crankarms with 24mm spindles (Shimano Hollowtech II, Raceface X-Type) with newer BB30 and PressFit 30 bottom bracket bearings.
Recommended retail price***: 61,90 €.
The Problem Solvers GXP adapter kit is made specifically for use with the Problem Solvers BB30/PressFit 30 Adapter kit (CR0096) or the Problem Solvers Eccentric 46 Bottom Bracket (CR0098).
Recommended retail price***: 48,90 €.
This adapter set allows the use of SRAM / Truvativ cranks with 22 / 24 mm GXP hollow axle and ACROS bottom brackets for 24 mm hollow axles.
Circlips QC616/ to fixing bearings in BB30 bottom brackets. 2 pieces
Plastic Shims QC617/ for BB30 cranks. 5 pieces
Waved Washer QC618/ to adjust
bearing clearance for 30 mm cranks. 1 piece
Bearing Shield KP307/ for SiSl2 cranks. 2 piece
Please use the following characteristics in order to narrow down your product results.
Continue by clicking "use filter" to carry out the filter