On dropouts thinner than 7mm, the use of the Rohloff Speedhub 500/14 with 13 tooth sprocket (chainline 58mm) will require the use of the longer mounting bolt for the Rohloff chain tensioner.
The Speedbone allows the use of a Rohloff Speedhub 500/14 with disc brakes and the OEM2 axle plate to replace the long torque arm. The adapter can be used on frames with IS2000 brake mounts only.
OEM2 axle plate to directly support the torque of Rohloff Speedhub on frames with IS2000 brake disc mounts.
Axle plate to directly support the torque of Rohloff Speedhub hubs with quick release system (135 mm/170 mm) on frames with Postmount brake disc mounts.
Axle plate to directly support the torque of Rohloff Speedhub hubs with thru axle system (142 mm/177 mm) on frames with Postmount brake disc mounts.
Axle plate for mounting the classic torque support at the chainstay.
For frames without OEM dropouts or disc mount.
Torque support for Rohloff Speedhub, for use with normal axle plate.
Bolts for mounting the torque support to the axle plate of the Rohloff Speedhub.
Clamp for mounting the torque support of Rohloff Speedhub to the frame.
Please use the following characteristics in order to narrow down your product results.
Continue by clicking "use filter" to carry out the filter