The ACROS Conversion Kit for use as spare part of your Nineteen 15x110 mm Boost front hub. The conversion kit includes a aluminium axle and two aluminium end caps.
ACROS end caps for Nineteen ED, FR, XC and RD Disc 15x100 mm front hubs for conversion of the hub when used on RockShox forks with Torque Cap dropouts.
Butted 17 mm oversize axle, intelligent bearing positioning for maximum stiffness and life span at lightest possible weight. For 15 mm thru axle.
Syntace HiTorque Evo6/ Boost Hubs, 110mm wide. Very light oversize hubs for the maximum in stiffness and resistance.
An end cap for the Syntace HiTorque MX/M 15/20 front hub or MX/M 12 rear hub.
Continuously adjustable end cap for the Syntace HiTorque MX/M front hub.
0.3 mm steel support washer and four springs for the Ratchet freewheel of the Syntace HiTorque MX/M Rear hubs.
Butted 17 mm oversize axle, intelligent bearing positioning for maximum stiffness and life span at lightest possible weight. For 12 mm thru axle.
Syntace Boost/ Evo6 Hubs with width 148mm. Comparing to 142mm hubs the flanges go respectively 3mm to the left and to the right and you get a stronger and stiffer wheel. For 12 mm thru axle.
Cover for Center Lock disc brake rotor mounts in case they are not being used.
Recommended retail price***: 21,90 €.
Please use the following characteristics in order to narrow down your product results.
Continue by clicking "use filter" to carry out the filter