The small detail that makes all the difference!
Blade technology applied to the Kéo 2 Max: for new clip-in/clip-out sensations and an aerodynamic profile. A large and wide platform (400 mm² / 60 mm) ensures excellent pedalling stability and good power transfer. New spindle system providing reduced platform height (14 mm).
COMPOSITE MATERIAL BLADE
The Kéo 2 Max Blade is made of injection-molded composite fiberglass material providing cleaner engagement than a Kéo 2 Max pedal but less radical than a Kéo Blade 2. Two blade versions are offered for 2 different tension levels: version 8 and version 12. Integrating the blade into the pedal body gives the Kéo 2 Max Blade and aerodynamic profile for optimal air flow.
VERY LARGE PEDAL PLATFORM AREA
With a 400 mm² stainless steel platform, the Kéo 2 Max Blade is positioned between the Kéo 2 Max and the Kéo Blade 2 providing excellent stability and very good pedalling efficiency. This efficiency is also made possible by permanent cleat-stop contact: the shape of the stops at the rear of the pedal has been designed to fit the shape of the rear of the Keo cleats.
TOP QUALITY SPINDLE SYSTEM
The spindle system used on the Kéo 2 Max Blade is the same as that used on the Kéo Blade 2: 2 ball bearings and one needle bearing thus ensuring high product reliability, besides passing tests in excess of standards* that LOOK commits to having its products subjected to 2 million cycles at 100 rpm with a 90 kg load on the centre of the pedal and eccentric rotation (the standard requiring 100,000 centred rotation cycles with a 65
This is the equivalent of a 1,700 watt sprint by Mark Cavendish at 100 rpm for 333 hours!
The new LOOK spindle’s 14
mm thread length enables Q-Factor to be adjusted by 2 mm using a special spacer available as a spare part.
This increases from 53 to 55 mm.