Description of Ortlieb Back-Roller Design - QL2.1 Bike Pannier (pair) - Parts: lime - black
It brings more colour into your life, daily shopping and work trips. The trendy rear panniers are made of PD620 and PS490 and feature a waterproof roll closure and QL2.1 mounting system. Once taken off the rack, the padded strap allows a comfortable shoulder carrying. Strong 3M Scotchlite reflectors ensure safety in the dark and in bad weather conditions. With the ORTLIEB Travel-Biker or Trunk-Bag they also form a functional combination on the rear bike rack.
Further features: integrated inner pocket; 8, 10 and 12 mm reduction inserts included for racks up to 16 mm, can also be used individually, easy to clean.
The pannier mounting system Quick-Lock2.1 is based on the proven QL2 system, however, several decisive features were considerably improved, especially with regards to racks currently on the market.
This optimized system has the following features that distinguish it from others:
Automatic closing and opening of hooks by lifting the pannier handle.
When the pannier is lifted by the handle, the two hooks on the reverse side are opened. Then the pannier can be hooked into the rack. Once you let go of the handle, the two hooks close around the rack tube.
16 mm QL hooks with inserts which have an "Anti-Scratch" function for 8, 10 and 12 mm (size 12 mm e.g. required for Racktime racks). In QL2.1, the reductions inserts are now attached from the sides and secured against loss.
20 mm QL hooks are optionally available for racks with larger diameters (17-20 mm) as often used on E-bikes.
The upper mounting rail consists of one piece for higher stability. With models Office-Bag and Downtown it can be adjusted to the left or right side of the bike rack.
The new assembly system allows the use of extremely flat nuts on the inner side thus featuring a level surface and avoiding damage to whatever you bring along.
Optional upgrade with anti-theft device into the upper rail.
The lower hook rail is made of a two-component synthetic combination with "Anti-Scratch" function. This reduces abrasions on the carrier and prevents damage to the rack tubing. The lower hook is rotatable in 15° steps and adjustable in height.
Just as in the conventional QL2 system, all hooks are adjustable to the rack without requiring any tools and can be easily exchanged.
Fact Sheet of Ortlieb Back-Roller Design - QL2.1 Bike Pannier (pair) - Parts: lime - black
Ortlieb Back-Roller Design - QL2.1 Bike Pannier (pair) - Parts: lime - black
approx. 1900 gram
40 liter (pair)
height: 42 cm upper width: 32 cm bottom width: 23 cm depth: 17 cm
Flexibility on the road! The ORTLIEB Bike Pannier Carrying System is a quick and easy solution for converting an ORTLIEB pannier into a backpack. Fits into all ORTLIEB bike pannier models with
QL1, QL2 and QL2.1.
A more minimalist design is hardly imaginable: the Light-Pack 25 is the lightest of the waterproof ORTLIEB backpacks. With a 25-liter payload and a weight of only 290 grams, the Light-Pack 25 offers an optimal weight-to-volume ratio.