Description of innobike / Innotech 105 High Tech Chain-Fluid Lubricant Refill Set with Brush 200ml
Innotech 105 High Tech chain fluid. The innovation: cleaning and lubrication in one process! Dirt, sediments and gumming are being cleaned thereby as well as particles removed and washed off from the rubbing areas.
High-tech chain fluid 105 is specifically formulated with extremely penetrating wash-active substances to get into the narrowest tolerances such as chain inner bearings, chain drive bushings and plugs. After the solvent's flashing off process, the OMC² technology's permanent lubrication- and protection film (approx. 3 layer strength) remains on the clean chain managing comprehensive lubrication of the chain. Numerous references, field reports and tests on the Innotech homepage document the perfect cleaning and lubrication characteristics of the Innotech 105 chain fluid.
Application with brush tip:
1. With a little pressure you aim the brush in the direction of travel of the freewheeling chain. Dirt and even the tiniest particles are now removed and flushed out of the chain. Spray in roughly 2 – 3 pedal turns until chain fluid drips from the chain at the front on the bottom bracket sprocket.
2. Now wait for approx. 15 to 20 minutes for the 105 HIGH TECH CHAIN FLUID to drip off and dissolve all resin formations.
3. Now clean the lower section of the chain between the sprocket rim and the large sprocket with the brush while occasionally using the Fluid in order to flush away the dirt and the loosened resin residues.
4. After a few hours the solvent has evaporated completely. Thanks to the remaining high-tech additive the chain is now effectively lubricated without sticking.
Fact Sheet of innobike / Innotech 105 High Tech Chain-Fluid Lubricant Refill Set with Brush 200ml
innobike / Innotech 105 High Tech Chain-Fluid Lubricant Refill Set with Brush 200ml