WD-40 BIKE Dry Lube has been specially developed for riding in dry and dusty conditions. Its PTFE-containing formula penetrates into chain links and creates a fine lubricating film to ensure optimum lubrication, without attracting dust.
Long lasting lubrication
Reduces friction & wear
Improves chain efficiency
Penetrates deep into chain links
Tipps & Tricks:
Before use and to get an optimal result, clean the chain with WD-40 Bike Degreaser to get rid of dirt, oil and gunk.
When lubing your chain, drip the lube onto each individual roller instead of just applying a stream along the entire length of the chain. Lube does nothing for the outside of the chain; it only works to reduce friction and keep dirt out of the inside of the rollers. Be sure to run a rag over the chain after letting the lube set for a while. Any lube left on the outside of the chain will be a magnet for dirt and grime.
WD-40 Bike Dry Lube isn’t just for chains. It’s great for brake pivots, derailleur pulley bolts, main parallelogram pivots and pedal retention springs. If you’ve just finished a wet ride, drop a spot of lube inside brake and derailleur cable housings to keep things moving freely. Remember to wipe off excess lube.