Description of SRAM Level Ultimate Disc Brake - rear - black anodized
Level Best - SRAM Level Ultimate
As its name implies, this is the Ultimate brake design for cross-country and light trail use. SRAM took the same technology used in the brake that Loic Bruni rode to a Downhill World Championship and packed it into smaller, sleeker, lighter-weight and XC-optimized package. The carbon-fiber level blade pulls crisp and clean thanks to pivot bearings and the DirectLink™ design. And it maintains that feel throughout the ride because it is matched to the monoblock, two-piston caliper. This caliper’s superior heat management and smooth piston actuation give you braking power exactly when and how you need it. And the BLEEDING EDGE™ design significantly simplifies fluid maintenance.
SRAM Level – Poise, Power, Control
Technology of SRAM Level Ultimate:
New bleed porting and fluid path make it easier to push fluid through the caliper for quick and easy bleeding; dedicated bleed adapter for the S4 caliper plugs into the bleed port and seals the system to minimize air contamination and fluid loss.
SRAMs DirectLink™ lever design takes care for a solid, positive feeling, as soon as the lever gets pulled – a non-compromizing solution for precise controle.
Heat is the enemy of every braking system. A better heat-management gives you a significantly safer ride. SRAM fount out, that DOT 5.1 needs three times longer than DOT 4 to reach its boiling point. This ensures safe and never fading brake power even under extreme conditions.
SRAMs new lever design contains a new bladder, wich regulates and deminishes bubbles. It is shaped to drain air from the lever and transport the fluid exactly to where it is needed. As aresult, an enhanced counter-pressure discharge is reached to grant reliable and constant braking performance.
The stainless steel heat shield breaks the thermal connection between the pad and caliper body, reducing caliper fluid temperature by about 20°C even in the most extreme testing conditions.
Lever Pivot Bearings
Sealed bearings at the pivot ensure clean, precise lever-movement and enable lever actuation with a single digit.
Compatibility with MatchMaker and MMX
With Matchmaker you save weight and space at the handlebar. Matchmaker takes Avid-brakelevers, SRAM®-triggers and various RockShox® controls in form of a light and tidy clamp – this way the dream of space-savers worldwide came true. The system is available in two versions: Matchmaker™ X gives room for RockShox® Xloc and is compatible with XX- and XO brakes. The conventional Matchmaker™ works with any split clamp and RockShox® PushLoc system.
SRAMs current lever design is directed towards maximum performance and easy handling. The piggy-back design offers an easy and safe solution to control braking fluid and enables mounting on either side. You can swap levers to ride your bike moto-style.
Timing Port Closure
The timing port of a hydraulic brake connects the reservoir with the main actuating cylinder. While pressing the lever, a cup seal passes the segment and locks the bore, which sets the system under pressure. SRAMs new TPC Plus system has resistive seals and an ultrasmooth cylinder surface for reliable and constant braking performance.
Requires Bleeding Edge™ bleed adapter, which is not scope of delivery.
Fact Sheet of SRAM Level Ultimate Disc Brake - rear - black anodized
SRAM Level Ultimate Disc Brake - rear - black anodized
Manufacturer item code:
caliper and brake body: aluminum lever: carbon hardware: Titanium
approx. 318 gram (direct mount, 800 mm hose, 160 mm CLX rotor - manufacturer information)
optionally: 2-piece CenterLine X; 140, 160, 180 mm (not included)
Monoblock, 2-piston caliper
Included in delivery:
bleeded brake consisting of caliper, hose, brake body, Ti hardware, organic pads without rotor
SRAM Level T capitalizes on the same trail-taming brake technology that conquered the 2015 World Mountain Bike Championships, to deliver a powerful and consistent XC and trail-optimized brake set that keeps your capital in the bank.