SILCA Valve Core Extender with Removable Valve Core (2 pcs.)

Instead of RRP*** 29,95 € Our price:
22,90
You save 23%
Price incl. VAT excl. Shipping & Handling
for shipment to Germany.

Delivery time unknown **

  • Description
  • Fact Sheet
  • Availability**
  • Ratings (0)

Description of SILCA Valve Core Extender with Removable Valve Core (2 pcs.)

These valve extensions allow for a simple, air-tight installation without tape or threadseal and help reducing noise and vibration on the road. Equipped with a removeable valve core.

That dreaded valve stem 'click' has tortured many a deep-section wheel rider over the years, often only discovered after about everything else on the bike has been rebuilt and greased, valve stem 'clicking' or rattling occurs when the valve stem moves within the valve hole in the rim, generally on rougher roads. Silca uses a patent pending ribbed gasket which is compressible to both fit more tightly to the hole as well as to cushion any contact between the rim and extension when the gasket is aligned with the hole, and if the gasket is located beyond the hole, it still provides critical vibration damping which can greatly reduce noise.

SILCA removable valve core (RVC) extensions solve air leakage due to poor thread fitment or to stem loosening by using both elastomeric gaskets at the interfaces as well as a thin film sealant on the thread surfaces. This thin film is non-adhesive so your extensions will be re-useable, but works to eliminate loosening caused by vibration or other factors.

SILCA RVC Extensions work ONLY on tubes and tubulars with Removable Valve Cores. If you need a tube type extension for fixed, or non-removable core tubes, please check out our SILCA Fixed Core Valve Extensions.

Note: The fitment recommendations given by SILCA in the chart below are based on standard clincher and tubular tire well depths, your rim may vary slightly. Some rims have deeper tire wells, and some tubes may use other valve lengths. To ensure proper fit, you should measure the distance from inner rim face to base of tire well. Valve stem, plus valve extension should measure 14-24mm longer than distance between rim inner valve hose and outer valve hole. Locating the gasket within the hole is ideal, however, even if the gasket is entirely located outside the rim, some noise reduction will occur due to the damping effect of the gasket.

Features of the SILCA Valve Core Extender

  • Made from CNC 6066-T6 Aluminum with Elastomeric Gaskets
  • patent-pending ribbed Elastomeric Gaskets
  • tool for removing valve core and tightening extension included
  • Package Contains 2 Extensions pre-coated in thread sealant and 1 installation tool
  • Description
  • Fact Sheet
  • Availability**
  • Ratings (0)

Fact Sheet of SILCA Valve Core Extender with Removable Valve Core (2 pcs.)

Product Name: SILCA Valve Core Extender with Removable Valve Core (2 pcs.)
Manufacturer: SILCA
Item Code: SIL268707
Year: 2016
Material: aluminium
Included in delivery: 2 pieces, 1 installation tool
  • Description
  • Fact Sheet
  • Availability**
  • Ratings (0)
SILCA Valve Core Extender with Removable Valve Core (2 pcs.)
Delivery time unknownLength: 34 mm
Delivery time unknownLength: 45 mm
Delivery time unknownLength: 60 mm
Delivery time unknownLength: 75 mm
  • Description
  • Fact Sheet
  • Availability**
  • Ratings (0)

Average:

(0 Ratings)
Customer Reviews