ZIPP 202 NSW Carbon Clincher Wheelset - QR - Black

Instead of RRP*** 2.800,00 € Our price:
2.599,99
You save 7%
Free Shipping1. Price incl. VAT
for shipment to Germany.

in stock, delivery time 1-3 days **

  • Description
  • Fact Sheet
  • Ratings (0)

Description of ZIPP 202 NSW Carbon Clincher Wheelset - QR - Black

Zipp gave their top engineers in The Nest advanced development lab the task of shedding more weight from their lightest carbon clincher wheelset, the 202 Firecrest, while also improving rolling friction, aerodynamics, and braking, it was a very tall order. Zipp asked them to do all of this without sacrificing durability, it looked like an impossibility. But the NSW advanced development team delivered on every request and built the ultimate climbing wheelset, a climbing wheelset strong enough to use on every ride.


Engineered to be the fastest accelerating carbon clincher Zipp has ever made, 202 NSW flies up the toughest climbs, and then shaves even more time off of the descents to follow. And because extracting greater speed on the mountain is only half the battle, the 202 NSW is built to deliver the lowest aerodynamic drag available for a rim of this depth for speed everywhere else.

In order for a climbing wheelset to be world beating it has to do more than simply deliver low weight; it has to deliver uncompromising performance on every level. This is why Zipp engineers in The Nest chose to enhance the world’s fastest climbing carbon clincher, the 202 Firecrest.

With a new lighter carbon fiber layup for the 32mm deep 202 NSW they’ve dropped weight where it matters most, at the outer edge of the wheelset, while maintaining the durability and lateral stiffness that Firecrest is famous for. Then they reduced aerodynamic drag with ABLC Sawtooth™ technology and used ImPress™ graphics to ensure that nothing stood between the air flowing over the rim and the dimples made to smooth that flow. Knowing that there is no benefit to a wheelset that climbs fast and descends slow, NSW engineers incorporated our Showstopper™ brake track for the most confidence inspiring rim braking performance available, whether the road is wet or dry.

To further improve the wheelsets rolling efficiency, the 202 NSW rim is laced to the groundbreaking Cognition™ hubset. Built around our Axial Clutch™ freehub technology, the Cognition rear hub is engineered to maintain speed when coasting by disengaging the ratchet mechanism. This technology enables the Cognition rear hub to deliver far less rolling friction than wheels using conventional freehubs - a real advantage when fighting through rolling foothills or when spun out on long descents.

Cognition hub

Every time a conventional hubset starts to coast, friction within the freehub ratchet mechanism works like a drum brake to slow the rider down. With Cognition's Axial Clutch™ technology, we've reduced this drag by disengaging the ratchet mechanism when coasting. With less internal hub drag a rider can pedal less when drafting in a headwind, achieve higher speeds when coasting in an aero tuck, or opt to stop pedaling a moment sooner before entering a corner and bank that wattage for use exiting the corner. Axial Clutch technology also allows riders to maintain speed through corners that don't require braking input, thereby increasing corner exit speeds.


Inside the axial Clutch mechanism magnets are used rather than steel springs to move and engage Zipp's light weight Metal Injection Molded (MIM) ratchet rings for unmatched reliability and consistent operation. With 36 points of engagement that all interlock simultaneously, Cognition hubs offer one of the most secure freehub mechanisms on the market.

ImPress™

Zipp's ImPress™ technology prints graphics directly on the wheel, to help allow the dimples to do what they were designed to do - control vortex shedding, the rate at which air sheds off the wheel. Managing this is crucial to stability. Like the 808 NSW, ImPress graphics also give the NSW wheels a distinctive stealthy look while keeping the rim as light as possible.

ABLC (Aerodynamic Boundary Layer Control) Sawtooth™

The new Sawtooth™ dimple design consists of 12 nodes that are precisely clocked to start aerodynamic shearing at a rate of 50 Hz at a rider speed of 20 mph. Sawtooth™ accomplishes this by inducing small sheet vortices that shed at a low magnitude, but at a higher natural frequency, thus decreasing the laminar bubble effect on the aerodynamically shielded side of the rim's profile to further reduce high yaw drag and improve crosswind stability. That crosswind stability then imparts peace of mind when the weather turns south while saving watts that would have been expended while attempting to hold your line.

Showstopper™

When it comes to braking, "good for a carbon rim" wasn't good enough for the NSW wheels. Zipp wanted braking performance that was better than at aluminum rims, and they achieved that goal. The silicon carbide Showstopper™ brake track, which is counted among the industry leading, delivers an extraordinary stopping power and modulation regardless of weather conditions or the length of the descent. With Showstopper™ braking performance, you'll need to find another excuse not to ride on rainy days.


Recommended and approved brake pads for zipp Carbon wheels:
  • Zipp Tangente Platinum Pro Evo Brake Pad
  • Zipp Tangente High Performance Cork Brake Pad
  • Zipp Tangente Platinum Pro (first version Tangente pad)
  • SwissStop® Black Prince pad
  • Bontrager cork pads
  • Zipp carbon/carbon pads
  • SwissStop® yellow pads

Technical note: Requires special brake pads for carbon rims.
  • Description
  • Fact Sheet
  • Ratings (0)

Fact Sheet of ZIPP 202 NSW Carbon Clincher Wheelset - QR - Black

Product Name: ZIPP 202 NSW Carbon Clincher Wheelset - QR - Black
Manufacturer: ZIPP
Item Code: ZIP289747
Year: 2017
Manufacturer item code: 00.1918.319.000
00.1918.320.000
00.1918.320.001
Material: rim: carbon
spokes: stainless steel
nipples: aluminium
Weight: approx. 1375 gram (manufacturer information)
Rim: X32NSW
Rim height: 32 mm
external/internal rim width: 25.4mm (max.) / 16.25mm
E.T.R.T.O.: 16-622
Spokes: Sapim CX-Ray
Nipples: Sapim Secure Lock
Spokes number: front: 18 (radial) / rear: 24 (2x crossed)
Hub axle system: front: 100 mm / HR: 135 QR
Fitting type of tire: clincher / wire bead / folding tire
Maximum tire pressure: 125 psi (8.6 bar)
Purpose: competition
hub: Zipp Cognition front hub / rear hub
Fitting for shifting: SRAM/Shimano 10/11-speed
Campagnolo 9/10/11-speed
Max. permissible total weight
(rider + bike):
113 kg
Color: black (black carbon rim | black print), black spokes, glossy black hub
Included in delivery: wheelset, Platinum Pro Evo brake pads, titanium quick release, valve extender, wheelbag, tube 700c, rimtape
  • Description
  • Fact Sheet
  • Ratings (0)

Average:

(0 Ratings)
Customer Reviews