Description of Shimano SLX FD-M7000-10-H - Side-Swing Front Derailleur 3x10 - High Clamp - black
Shimano's Rider Tuned philosophy is on display with SLX M7000, as the group offers a broad spectrum of drivetrain range options, and supports the latest trail and recreational bikes with bigger tires, wider hub flange spacing or both. New Shimano SLX M7000 has been redesigned from the ground up to perform in any trail situation.
The shifting power of the 10-speed FD-M7000 front derailleur has been increased allowing for rapid shifts with efficient cable routing and a light shift operation. Increased tire clearance allows for shorter chainstays. Designed with long-travel bikes in mind.
Note: For chain stays with an angel from 66-69°. Chain line 50mm.
Properties of this derailleur
Fitting for shifting: 3x10-speed Mounting: high clamp Construction type: Side-Swing Cable route type: Front Pull
Thanks to the Side-Swing technology the shift performance of the front derailleur can be increased by 100 percent. Designed specifically with modern trail bikes in mind it provides 15mm of increased tyre clearance whilst new cable routing dramatically reduces the shifting effort.
Note: Because of the front position of the coiling cable bushing at the front derailleur, the shifting cable must be installed inside or above the down tube.
Side-Swing technology using the example of XTR 9000 front derailleur:
Fact Sheet of Shimano SLX FD-M7000-10-H - Side-Swing Front Derailleur 3x10 - High Clamp - black
Shimano SLX FD-M7000-10-H - Side-Swing Front Derailleur 3x10 - High Clamp - black
Manufacturer item code:
approx. 152 gram (manufacturer information)
Construction type/Clamp diameter:
Side-Swing / high clamp 34.9mm (31.8mm / 26.8mm with adapter)