Syntace W35 MX Boost 26" Wheelset - 6-Hole - FW: 15x110mm | RW: 12x148mm (X-12)

Our price: Our price:
680,00
Free Shipping1. Price incl. VAT
for shipment to Germany.

Production, delivery time 1-3 weeks **

  • Description
  • Fact Sheet
  • Availability**
  • Ratings (0)

Description of Syntace W35 MX Boost 26" Wheelset - 6-Hole - FW: 15x110mm | RW: 12x148mm (X-12)

Syntace Boost

With the 148mm/ 110mm boost hubs it's possible to build much stronger and stiffer wheels. The distance between the flanges increases from 142mm to 148mm. This innovation is important for 29inch wheels. Comparing to normal hubs the weight of the boost hubs is not essential higher.

Rear wheel, that is distinctly different where it matters!

The Syntace W35 MX Boost wheel with an external width of 35 mm is extremely lightweight. Because light weight tyres with thinner side walls that roll better only really start to show good all-round performance when mounted to wide rims, without reduced puncture resistance.

Configuration: Asymmetrical Syntace W-Series MX rim with custom drilling and spoke angle matched hub flange. 32 butted spokes, triple crossed, Sapim alloy nipples. Hand lacing quality.

Black aluminium instead of carbon: The ductile material aluminium has its rightful place in two finger wide rims rolling over sharp rocks, roots and steps. If it were just possible to bend sufficiently lightweight rims. It's possible.

Lightweight and tougher than carbon rims: Thanks to the Syntace precision profile made of a custom high strength alloy, welded and multiply cold worked and heat treated. Stress reducing asymmetrical Syntace W-Series profile design with side step drilling pattern.

360° Syntace ToughSkin: All round, meaning even inside the bead hook, the rims are shot peened for increased surface density. This cold working process of the aluminium not only achieves a measurable increase in material surface hardness but also creates a "grippier" surface at all tire contact areas for the tire to hold onto. This reduces the the likelihood of the tire to move on the rim under large loads, especially when riding with low air pressure. And reduces the likelihood of tearing off a valve.

Recommended range of application: Best handling characteristics combined with free rolling. Previously unheard combination of free rolling and traction control for all application from tour to trail up to all mountain. Suitable for rider weight up to 110 kg.

HiTorque MX Hub
One of the toughest hubs on climbs and descents. The heart of the Syntace wheels are the Syntace developed and manufactured Syntace Hi-Torque MX hubs (Pat, pend.). Finest turning and machining craftsmanship, inconspicuous appearance, but with superior inner qualities.

Ratchet Freehub: all or none!
The name and the crisp sound already lead to the presumption: the freewheel mechanism of the Syntace rear hub will withstand more than others. The ratchet mechanism principle which Syntace further refined, guarantees that force transmitting teeth can't engage individually and as a result are overloaded. In exactly that moment when one tooth wants to engage, all teeth inevitably engage in synchronization. The 36 teeth, in Germany precision machined high strength ratchets, are driven by four spiral springs.

Even with icy cold winter temperatures the Syntace Hi-Torque MX shows no engagement denials or signs of "chain-push" issues with consequent chain wrap attacks.
The robust flanges which are made of high strength 7075 alloy, featured by a test machine optimized dimensioning and they are spoke angle matched.
Its strong heart, the butted 17 oversize axle as well as the intelligent bearing positioning provide maximum stiffness and life span at lightest possible weight. Adaptable to all current axle standards by simply changing the end caps.

HiTorque MX Rear 12
  • butted 17 mm oversize axle, for maximum stiffness, durability and lowest possible weight
  • Hub body with two double sealed 17x30x7 precision cartridge bearings
  • Freewheel with two double sealed 17x26x5 precision cartridge bearings
  • Ratchet freewheel with 10° pitch (36 tooth), with reduced 1.5° engagement freeplay. Total engagement angle approx. 11.5°
  • optimized engagement due to four spiral springs
  • Disc brake interface: 6 hole standard
  • New for 2014: MicroAdjust end cap
  • Description
  • Fact Sheet
  • Availability**
  • Ratings (0)

Fact Sheet of Syntace W35 MX Boost 26" Wheelset - 6-Hole - FW: 15x110mm | RW: 12x148mm (X-12)

Product Name: Syntace W35 MX Boost 26" Wheelset - 6-Hole - FW: 15x110mm | RW: 12x148mm (X-12)
Manufacturer: Syntace
Item Code: SYN291509
Year: 2017
Manufacturer item code: FW:126565 | RW:126640
E.T.R.T.O: 28,4-559
Material: rim, spokes: custom aluminium
hub: 7075 aluminium
Weight: approx. 1780 gram (manufacturer information)
Spokes: triple butted, triple crossed, black
highly stressed side: 1.8 mm
less stressed side: 1.5 mm
Spokes number: 32
Nipples: Sapim aluminium double square, black
Rim: W35 MX
Rim height: 20.5 mm
Rim Width: 28,4 mm (inner)
35 mm (outer)
Color: rim/hub: race black
Purpose: Touring, all mountain
Hub: HiTorque MX Front 15 front hub
HiTorque MX Rear 12 rear hub
Fitting for shifting: 10/11-speed Shimano / 10-speed SRAM, SRAM XX1 optional
Freehub: Tooth washer freehub
Disc brake standard: 6 hole
Fitting type of tire: clincher, tubeless ready
Fitting tire dimension: 2,25 bis 2,5'
Valve hole: 6,0mm Ø (Sclaverand)
Hub axle system: FW: 15x110 mm | RW: 12x148 mm (X-12)
Included in delivery: Wheel set without thru axles and rim tapes
  • Description
  • Fact Sheet
  • Availability**
  • Ratings (0)
Item includes
Production, delivery time 1-3 weeksSyntace W35 MX Boost 26" Rear Wheel - 6-Hole - 12x148mm (X-12)
Production, delivery time 1-3 weeksSyntace W35 MX Boost 26" Front Wheel - 6-Hole - 15x110mm
  • Description
  • Fact Sheet
  • Availability**
  • Ratings (0)

Average:

(0 Ratings)
Customer Reviews