CUBE TWO15 - MTB Frameset - 2019 - globalsquad

Instead of 1.343,70 € Our price:
You save 21%
Price excl. VAT excl. Shipping & Handling
+ Bulky Goods/Item 20,00 €
for shipment to United States.
Bike assembling and shipping

Availability: please select.

  • Description
  • Fact Sheet
  • Availability**
  • Ratings (0)

Description of CUBE TWO15 - MTB Frameset - 2019 - globalsquad

World Cup-tested high-end kit!

The Two15 frameset is your chance to set up a piece of World Cup-tested high-end kit to your own specifications. This is a genuine race replica so, of course, CUBE finished it in their Global Squad design.

The principle behind the Two15's frame design is the same successful four pivot concept that powers all CUBE's full suspension bikes. That's important, because it means that they were able to realize the same suspension characteristics as their super-efficient trail bikes, but with plenty of rear wheel travel and noticeably better agility and control than simpler DH bike designs. But CUBE didn't stop with the kinematics - their engineers also put a lot of effort into reducing weight. The Two15's hydroformed, triple butted tubeset with 157 mm rear hub spacing weighs only a little more than an enduro frame, but delivers extraordinary steering precision and epic rock swallowing ability. CUBE's optimised suspension design provides apparently endless grip on every trail surface, and the internal cable routing keeps gear shifts clean and the the frame's looks cleaner still.

  • Aluminium Ultralite - Very high tensile strength heat-treated 7005 aluminium alloy is developed for the highest requirements. It is very stiff, fatigue resistant, corrosion resistant and has high elongation. The CUBE Superlite tubes are triple butted, giving very light tubesets with a high level of stiffness.
  • Advanced Hydroforming - Conventional hydroforming processes cannot achieve these custom shapes and technical advantages. As this manufacturing method reduces the number of welds, the weight is reduced while durability is increased.
  • FSP4 Link - The key requirement is for continuously active and fully usable travel, with the rear triangle unaffected by pedalling or especially braking forces. There are a number of ways of achieving this CUBE favours a four bar design with a chainstay pivot. Here, one of the pivots is located between the dropout and the chainstay, ensuring that braking does not have a negative effect on the movement of the rear wheel. By carefully positioning the remaining pivots, they obtain the finest riding qualities for their full suspension bikes both uphill and downhill.
  • Adaptable X12 Hanger - CUBE optimized their new dropout design based on the Syntace X12 through-axle system, enlarging the area of the frame where the hanger is mounted. CUBE can now fit the longer Direct Mount hangers. Shifting precision and stiffness is therefore improved. With the new design it's also possible to swap the whole contact area of the axle with the hanger should the system be worn out.
  • Integrated Post Mount - The post mount rear brake system is found on all carbon fiber frames and top aluminum full suspension models. Two bolts and the IS adapter aren't needed anymore, and fewer parts means less weight. In this case CUBE save 30 grams. This may not sound a lot. But there's potential to save weight in every detail.
  • FOX Customized Setup - Sophisticated suspension kinematics are only able to work correctly if the associated shock is properly tuned. CUBE researched and found a specific shock setup in cooperation with Fox Racing Shox, using extensive testing for almost every CUBE full-suspension model.
  • Wet Paint Surface - On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. CUBE use this surface treatment technology mainly to save weight.
  • Description
  • Fact Sheet
  • Availability**
  • Ratings (0)

Fact Sheet of CUBE TWO15 - MTB Frameset - 2019 - globalsquad

Product Name: CUBE TWO15 - MTB Frameset - 2019 - globalsquad
Manufacturer: CUBE Bikes
Item Code: CUB392740
Year: 2019
Manufacturer item code: 258300
Material: aluminium
Weight: approx. 4800 gram (manufacturer information)
for Wheel Size: 27.5" / 29"
Disc brake mount: PM (7") 180mm
Rear travel in mm: 200
Recommended front travel in mm: 200
Incl./Excl. fork: without fork
Incl./excl. shock: with rear shock: Fox Float X2 Factory, 240x76 mm, High/Low Speed Compression & Rebound, Kashima Coated
Recommended headset: ZS49 / 40.EC49 / 30
shock dimensions: top: 30x8 mm, bottom: 22x8 mm
Seatpost diameter: 31.6mm
Seat Clamp diameter in mm: 34,9
Bottom Bracket type: Pressfit
rear axle: 12x157 (RW)
Changeable derailleur hanger: Yes
Included in delivery: Frame | rear shock | SDG I-Beam Carbon, 31.6 mm seatpost | CUBE screwlock seatclamp, 34.9 mm | Syntace 12x157 mm axle
Manufacturer page:
  • Description
  • Fact Sheet
  • Availability**
  • Ratings (0)
Selection: CUBE TWO15 - MTB Frameset - 2019 - globalsquad
Still 1 in stock in stock, delivery time 13-15 days frame size / wheel size L / 29"
  • Description
  • Fact Sheet
  • Availability**
  • Ratings (0)


(0 Ratings)
Customer Reviews