Beast Components ED30 27.5 Inches MTB Carbon Wheelset - 6-Bolt - FW: 15x110mm | RW: 12x148mm - Boost - 2019 - SQUARE black

Beast Components developed the ED30's rim design with the aim of a sufficiently rigid and robust product that still feels comfortable enough for harsher conditions and hard usage.

Thanks to "Solid Edge Design" and the "Framed Edge" Beast wheels obtain a very resistant rim flange, which is protected against delamination and also withstands hard impacts. The rim is fitted with internal brass nipples. Beast Components relies on small and angularly milled spoke holes which ensure that the spoke does not bend when lacing the wheel. So they obtain a best possible result with optimum spoke tension.

After the rim has been demoulded, only the burrs are removed. The surface will not be sanded anymore. This is Beast Components' exclusive "Out Of The Box Finish".
What you see, is what you get.

The main features of the Beast ED30 wheelset:

• range of use: All Mountain | Enduro
• weight single rim: 445 grams
• weight wheel set: 1523 grams
• width: 37 mm | height: 25 mm | rim width: 30 mm
• asymmetrical design with 2 mm offset of the spoke holes
• Tubeless Ready | Hookless Design | Disc Only
• hubs: DT Swiss 240s
• spokes: Sapim CX-Ray | black
• nipple: Sapim | aluminium | internal
• rim tape: inclusive | black
• weight limit: none
• Handmade in Germany

DT Swiss 240s hubs

The 240s is DT Swiss' top-end hub for extremely light wheelsets. Like the wheels, the aluminium hubs themselves are handmade, to be precise 100% Swiss made for world class precision and quality. The advantages of the 240s are its extremely low weight, its high-class contact free double flange seal system against water and dirt, its bearings made of stainless steel and a special coating which guarantees for smooth rolling characteristics.

The 240s is famous for its unique star ratchet freehub. The patented freehub system which utilizes precise star ratchets, guarantees for a very high load capacity and reliability. Thanks to the "no tool" concept maintenance is fairly easy.

Beast Components - Handmade in Germany

The Beast Carbon components are produced entirely in-house at the Black East GmbH in Dresden, Germany - here bikes are loved and lightweight construction is lived. The quite young company is a spin-off of the Rolls-Royce University Technology Centre, a dedicated engineering department at the Technische Universität Dresden. Thus, the scientific standard when working with carbon as a material is the first priority. Using state-of-the-art techniques from the automotive industry, aerospace and innovative manufacturing processes, the quality and practicality of road and mountain bikes is expected to benefit and improve significantly. Final stage geometry optimizations and life expectancy of fiber-reinforced plastics are central keywords here.

With Beast Carbon components, the style comes to the bike - considerably lighter and stronger than ever before!