Fox 36 Float FIT GRIP2 Factory 27.5" Fork - 170mm - 44mm Offset - Tapered - 15x100mm - 2020 - matte black
- Fact Sheet
- Ratings (0)
Description of Fox 36 Float FIT GRIP2 Factory 27.5" Fork - 170mm - 44mm Offset - Tapered - 15x100mm - 2020 - matte black
The synonym for riding pleasure and reliability.Crowned by the press, loved by mountain bike enthusiasts: the Fox 36 is the all-rounder in Fox's portfolio. Suspension travel from 100 mm to 180 mm and specific chassis for each wheel size. With the revised FIT4 damping it is even more sensitive and saves power in downhill - with GRIP2 damping it is the enduro race instance.
This model features the proven FLOAT air spring and the innovative FIT GRIP2 damper design that provides highest sensitivity and finest control. It comes with a tapered steerer and a 15x100 mm thru axle. This will stiffen the chassis of the fork and the wheel noticeably while still offering a quick and easy tool free way to remove and reinstall the wheel. The fork features Kashima coated 36 mm stanchions to reduce friction significantly compared to other coatings and offer exceptional responsiveness. Additionally, the distinctive golden Kashima coating offers extreme durability and classy looks.
FIT GRIP2 - Next-Generation Sealed Cartridge FIT Damper
FIT GRIP2 is next-evolution sealed cartridge FIT system and the highest performing gravity-focused damper by Fox. The new damper shares its roots with the original GRIP architecture, but has been seriously enhanced with all-new technology: 4-way adjustability, VVC high-speed rebound circuit, high-performance mid-valve, and overall friction-reducing treatments.
The revolutionary design of the GRIP2 damper provides independently adjustable high- and low-speed compression and high- and low-speed rebound.
In addition to offering incredible damper control, the adjustments also have a wider compression damping range to increase support without adding harshness.
Variable Valve Control (VVC)
GRIP2 now features high-speed rebound using Fox's novel and patent-pending approach: Variable Valve Control (VVC).
It is a revolutionary way to adjust the high-speed rebound circuit, effectively changing valve stiffness rather than adding preload. Unlike normal adjusters that add valve preload, VVC uses a leaf spring to alter valve flex in the high-speed rebound circuit. The adjuster provides the same effect as revalving high-speed rebound but without the need for damper disassembly.
A sophisticated mid-valve design allows more effective shaping of the compression damping curve, offering confidence-inspiring support that resists brake dive.
Tested and proven on the demanding World Cup Downhill circuit, GRIP2 has been relentlessly tuned to deliver just the right amount of support without harshness, giving it another level of refinement over previous generation dampers.
During the development of GRIP2, engineering uncovered improvements that greatly reduce friction.
Low friction seals help improve small bump compliance and honed, polished, and coated shaft and tube surfaces further eliminate friction for an unmatched ride experience.
The FLOAT air spring system is light and reduces the force to initiate travel, providing excellent sensitivity and small bump compliance for all riders and pressure settings. It features positive and negative air springs that automatically equalize during use to give each rider the right pressure balance.
A more linear spring curve gives EVOL forks and shocks plushness off the top, extra mid-stroke support, and more tunable bottom-out progression, allowing riders to tap into the ideal pairing of front and rear-end feel. The EVOL technology from rear shocks is now integrated into all FOX forks. EVOL increases negative air spring volume, specifically positioned and sized for optimum small bump sensitivity.
AIR VOLUME SPACERS
The progressiveness of the FLOAT air spring curve can be adjusted via air volume spacers, allowing riders to fine-tune the feel of the air spring.
- Fact Sheet
- Ratings (0)
Fact Sheet of Fox 36 Float FIT GRIP2 Factory 27.5" Fork - 170mm - 44mm Offset - Tapered - 15x100mm - 2020 - matte black
|Product Name:||Fox 36 Float FIT GRIP2 Factory 27.5" Fork - 170mm - 44mm Offset - Tapered - 15x100mm - 2020 - matte black|
|Manufacturer item code:||910-20-765|
|Weight:||approx. 1956 gram (for 160 mm travel, manufacturer information)|
|Wheel size:||27.5 inches|
|Max. tire dimension:||27.5 x 2.5" - from 2.35" the tire must be checked for clearance|
|Steerer diameter:||1 1/8" - 1.5"|
|Steerer Length in mm:||264|
|Fork length in mm (axle to crown):||559 mm|
|Stanchions Diameter in mm:||36 mm|
|Suspension:||FLOAT air spring system|
|Adjustability:||High-Speed (HSC)-/Low-Speed (LSC) Compression, High-Speed (HSR)-/Low-Speed (LSR) Rebound, Air pressure|
|Disc brake mount:||Postmount 6" (180 mm without adapter)|
|Axle version:||15x100 mm QR thru axle|
|Offset in mm:||44 mm|
|Included in delivery:||incl. 15 mm thru axle, star nut, air volume spacers and manual|
- Fact Sheet
- Ratings (0)