The Classic All New!
30mm high curved aero profile in 18C, 50 grams lighter and 20% more stiffness! Super light Concave-System aluminium high profile rim for highest acceleration and extreme load capacity. Even better aerodynamics than before due to the curved aero profile.
14 (or 16) bladed spokes in the front wheel and 21 bladed spokes in the rear wheel combined with the aerodynamically optimised high-profile rim and recessed aluminium nipples, ensure very good aerodynamics due to reduced air turbulence.
Power-Block spoke fastening
All play between hub and spoke is eliminated through the use of straight spokes threaded directly into a special sleeve in the hub. Even under permanent load CITEC wheels will resist spoke breakage, while constant re-tensioning and re-truing become unnecessary. Furthermore it increases the true running stability. The
CITEC Concave System is an innovative, patented rim construction method. It allows a decrease of weight while at the same time increasing the resilience of the rim. This new development, comparable to the arch of a bridge, allows Citec to reduce the spoke number in the wheel without compromising the integrity of the rim base. The forces acting on the rim are directed away. This guarantees long term strength and maximum resilience while saving weight at the rim, reducing rotating mass.
Features:
- 30mm deep clincher rim with machined braking surface
- special dedicated bladed spokes
- super smooth hub with sealed grooved ball bearings
- maximum flange width for increased lateral stiffness
5 years manufacturer warranty
Citec grants 5 years of warranty against spoke breakage.