Super stable and also light Enduro rear wheel!
The Syntace W35 MX wheel set with an external width of 35 mm is really wide and provides the „RightTireShape“ for tires up to 2.5". Cleverly combined with weight reducing tires, with thinner side wall carcasses, the W35 wheel set allows a weight saving up to 600 g.
Asymmetrical Syntace W-Series MX rims with custom drilling and spoke angle matched hub flanges. 32 butted spokes, triple crossed, Sapim alloy nipples. Hand lacing quality.
Black aluminium instead of carbon:
The ductile material aluminium has its rightful place in two finger wide rims rolling over sharp rocks, roots and steps. If it were just possible to bend sufficiently lightweight rims. It‘s possible.
Lightweight and tougher than carbon rims:
Thanks to the Syntace precision profile made of a custom high strength alloy, welded and multiply cold worked and heat treated. Stress reducing asymmetrical Syntace W-Series profile design with side step drilling pattern.
360° Syntace ToughSkin:
All round, meaning even inside the bead hook, the rims are shot peened for increased surface density. This cold working process of the aluminium not only achieves a measurable increase in material surface hardness but also creates a “grippier” surface at all tire contact areas for the tire to hold onto. This reduces the the likelihood of the tire to move on the rim under large loads, especially when riding with low air pressure. And reduces the likelihood of tearing off a valve.
Recommended range of application:
Best handling characteristics combined with free rolling. Previously unheard combination of free rolling and traction control for all application from tour to trail up to Enduro. Suitable for rider weight up to 120 kg.
HiTorque MX Hub:
One of the toughest hubs on climbs and descents. The heart of the Syntace wheels are the Syntace developed and manufactured Syntace Hi-Torque MX hubs (Pat, pend.). Finest turning and machining craftsmanship, inconspicuous appearance, but with superior inner qualities.
The robust flanges which are made of high strength 7075 alloy, featured by a test machine optimized dimensioning and they are spoke angle matched.
It's strong heart the butted 17 and 25 mm oversize axles as well as the intelligent bearing positioning provide maximum stiffness and life span at lightest possible weight. Adaptable to all current axle standards by simply changing the end caps.
HiTorque MX Rear 12
- butted 17 mm oversize axle, for maximum stiffness, durability and lowest possible weight
- Hub body with two double sealed 17x30x7 precision cartridge bearings
- Freewheel with two double sealed 17x26x5 precision cartridge bearings
- Spur geared freewheel with 10° pitch (36 tooth), with reduced 1.5° engagement freeplay. Total engagement angle approx. 11.5°
- optimized engagement due to four spiral springs
- Disc brake interface: 6 hole standard
- New for 2014: MicroAdjust end cap