COVID-19: Delivery time3 16 to 19 working days to United States (change country)

Cane Creek Helm Air 27.5 Inch Fork - 160mm - 44mm Offset - Tapered - 15x110mm Boost - Factory Black - B-Stock

Instead of 672,26 € Our price:
You save 29%
Price excl. VAT excl. Shipping & Handling
for shipment to United States.

Still 1 in stock

Ships immediately
Delivery time to United States 2-4 weeks

  • Description
  • Fact Sheet
  • Ratings (0)

Description of Cane Creek Helm Air 27.5 Inch Fork - 160mm - 44mm Offset - Tapered - 15x110mm Boost - Factory Black - B-Stock


This product is B-stock. The suspension fork has marks of usage. The function has been tested by the manufacturer, defects have been remedied if necessary.


Cane Creek's Helm Air is a high end Trail and Enduro fork with Boost standard and 170 mm travel which can internally be reduced to 100 mm via spacers and in steps of 10 mm. The stiff casting allows you to install tires with 65 mm maximum width and 714 mm height. The 35 mm stanchions are made of butted aluminium.

The Cane Creek Helm fork offers a closed damping cartridge with Mono-Tube design and an air damping with independent positive and negative air chambers and a mechanically adjustable negative spring. The adjustment options comprise High-Speed compression, Low-Speed compression and Low-Speed rebound.

Technologies of the Cane Creek Helm Air 27.5" fork

AIR Spring Technology - Independent positive and negative air chambers

Give your bike the advantage it has always wanted. Helm’s unique air spring system provides unmatched ride quality, traction, and accessory-free adjustability. The high volume air chambers allow for instantaneous off the top suppleness, superior mid-stroke support and unbelievable tracking.

Staying true to Cane Creek’s ideology #EveryRideIsDifferent, their engineering team isolated both the positive and negative air springs; enabling the rider to independently control the air pressures and feel throughout the entire stroke of their fork.

Damper Control

With predictable control as the main goal of any rider's suspension setup, Cane Creek gives riders the ability to take the Helm. With 10 clicks of High-Speed compression, 20 clicks of Low-Speed compression, and 15 clicks of Low-Speed rebound no rock garden is too big or rut too deep. The Helm's damper system is a true closed cartridge mono-tube design, eliminating additional weight, providing excellent actuation, and designed around robust internal seals. Critically tested for the abuse todays top enduro racers consistently dish-out.

D-Loc axle system

Helm's D-Loc axle system is unique to Cane Creek and a critical component for achieving the ride characteristics their engineering and test rider teams demand. Through a key and lock design the D-Loc axle maintains the course ahead while eliminating unwanted rotational and torsional forces that are normally transmitted to a fork's bushing and sealing surfaces. On traditional axle systems, these forces create excessive stiction and binding which can lead to diminished performance during aggressive riding. Precision machining is used to shave weight, maintain strength, and ensure specified tolerances. The preload adjusting nut, cam lever, and lock latch allow for simple adjustment and axle removal.

Air Volume Adjustment

Ramp it up and "huck to flat" or keep calm and ride along; the choice is in your hands. Or better yet the choice is in your Helm: with Cane Creek's indexed volume adjustment system. No "bottom-out" spacers or volume adjusting bands to keep track of. With an accessory free, 8-position static piston the Helm can be DIALED in to handle any trail and any rider.

Internal Travel Adjustment

The versatility of Cane Creek’s air spring does not end at the tuning process. Cane Creek’s engineers and product development team implemented pneumatic spring technology that allows riders to internally adjust the Helm's travel without the need to replace the air shaft assembly. Cane Creek Factory set the travel at 160 mm, but Helm Air forks are optimized for travel settings between 170 mm and 140 mm. The maximum reduction allows 100 mm travel. Two internal 10 mm travel adjustment spacers are included with every Helm.

Included in delivery: fork incl. QR15 D-Loc thru axle, two spacers for internal travel adjustment, ahead cap and star nut
Material: stanchions, steerer: aluminium
Weight supplement: with thru axle, without star nut | weighed by Bike24

  • Description
  • Fact Sheet
  • Ratings (0)

Fact Sheet of Cane Creek Helm Air 27.5 Inch Fork - 160mm - 44mm Offset - Tapered - 15x110mm Boost - Factory Black - B-Stock

Product Name: Cane Creek Helm Air 27.5 Inch Fork - 160mm - 44mm Offset - Tapered - 15x110mm Boost - Factory Black - B-Stock
Manufacturer: Cane Creek
Item Code: CCR522512
activity: Bike
material: Aluminium
usage bikesport: MTB, Enduro, All-Mountain
brake type: Disc Brake
wheel size: 27,5" / 650B (584mm)
travel fork: 160
axle standard: 15x110 Boost (FW)
air/coil spring: with air spring
fork/shock adjustability: Pressure positive air chamber, Pressure negative air chamber, Low speed compression, High speed compression, Low speed rebound, Lockout
fork length (axle to crown): 550mm
stanchion diameter: 35mm
suspension: air spring
damping: closed cartridge, Mono-Tube design
fork offset: 44mm
max tire width: 66mm
steerer diameter: 1 1/8"-1 1/2" tapered
shaft length: 263mm
disc brake mount: PM (6") 160mm, Postmount
steerer material: Aluminium
Model year: 2020
Color: Black
fork construction: classic
weight: 2064g
manufacturer item code: BAG0345K
Manufacturer page:
  • Description
  • Fact Sheet
  • Ratings (0)


(0 Ratings)
Customer Reviews