Campagnolo DTI EPS Interface Unit V2 for Power Unit V2
Why do you need an interface? The EPS™ electronic drivetrain functions with digital signals. Because of this, the electronic drivetrain needs an interface, which performs the vital function of transforming the analogue signal received from the Ergopower™ controls into a digital signal, which is then transmitted to the Power Unit™. But the interface also has important functions such as:
- displaying the battery charge status
- processing information coming from the rear and front
derailleur through the EPS™ Power Unit
- registering the initial set-up and allowing micro adjustments of the rear and front derailleur even while riding
- serves as a diagnostic mechanism displaying color coded
signals for any eventual problem with the EPS™ drivetrain
Zero Setting / Ride Setting:
The interface processes the data received during the initial setup of the front and rear derailleurs (Zero Setting) and also during smaller adjustments (Ride Setting). These smaller fine-tuning adjustments can be carried out while in the saddle as well.
The DTI™ interface transmits and receives signals to and from the
Power Unit™ thousands of times every second, processing them
accordingly to ensure that the drivetrain functions correctly in all situations.
The special design of the interface lets the user choose between two different installation solutions: on the brake cable or on the handlebar mount. The RGB LED lets the rider view the state of charge of the battery at any time.
| Farbe |
Ladezustand |
| GREEN |
100% - 60% |
| FLASHING GREEN |
60% - 40% |
| YELLOW |
40% - 20% |
| RED |
20% - 6% |
| FLASHING RED |
6% - 0% |
The special design of the interface lets the user choose between two different installation solutions: on the brake cable or on the handlebar mount.
Weight: 24 g
Included in delivery: Interface Unit V2, mount
Manufacturer item code: IF14-REEPS
