The CARAPAX is an Enduro helmet in every way: with its stylish swept-back design, bold air vents, a height-adjustable peak, perfect adjustability and integrated fly mesh, this helmet has everything an Enduro helmet needs.
Note: Please measure the head circumference to get the right helmet size.
Alpina helmets have inner shells made of Hi-EPS (highly expanded polystyrene). This material consists of many microscopically small air chambers which effectively absorb the forces caused by an impact. Hi-EPS provides optimum protection with the benefit of allowing extra-thin walls.
This impact- and scratch-resistant polycarbonate shell is fitted to all Alpina helmets manufactured using the Inmold procedure. The blank workpieces are shaped at high temperature onto the form of the helmet design and the shells are then pressed onto the helmet's Hi-EPS body. The material combines a number of distinct advantages: it is impact- and scratch-resistant, it contains UV stabilisers and is anti-static.
The Inmold production process involves the polycarbonate outer shell of the helmet being heated to a high temperature and "baked" onto the EPS helmet body at high pressure. This produces a permanent bond across the entire surface of the inner and outer shells, producing a helmet with the advantage of being very light yet extremely stable.
This manufacturing process ensures that there are no sharp edges to be found on Inmold helmets, reducing the risk of getting hurt in two ways: firstly, handling the helmet is always comfortable on the hands, and secondly, the bottom edge of the helmet will not cause scratches to the neck and shoulder areas in the event of a crash.
RUN SYSTEM ERGO PRO
The top-of-the-range model of ALPINA's new adjustment systems for the rear of the head features two large "head rests" to the left and right of a newly-designed adjustment wheel. These two wing-shaped pads and the adjustment wheel are made of twin-component mix of plastic and rubber. Since 2014, Run System Ergo Pro has been available in colours to match the helmet.
Tried and tested countless times, this is the buckle used in all Alpina cycle helmets. It features a red push button and multi-step automatic adjustment. It can be used one-handed, so for example you can loosen the strap when riding uphill and tighten it again for the descent, and it cannot come open in the event of a crash.
A helmet can only provide proper protection if it stays securely in place in the event of an impact. The fastening that joins the two straps under the ear is critical to this. Alpina's Y-Clip system guarantees a perfect fit down to the last millimetre, all in a matter of seconds.
As heads vary in shape they need an adjustment system that is flexible. In combination with the Run Systems, Custom Fit ensures a slip-free snug fit. The rear neck support can be adjusted to several angles of incline so that it fits snugly and without undue pressure.
The front ventilation holes have a mesh lining which effectively works as an insect screen to protect the wearer's head from insect bites when riding in hot or humid conditions.
The padding is designed to prevent the development of bacteria and odour caused by sweat. The helmet pads have been dermatologically tested and have excellent skin compatibility. They can also be easily removed and washed at a maximum temperature of 40° C.