The versatile rear wheel for roadbike/cyclocross/gravel use. Built with
The wheel is machine built and hand finished in
One of the key design objectives for the Pro 5 hub was the reduction of drag in the drive mechanism. This has real world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4.
Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6 pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability.
Rear wheel with 24mm rim tape, valve and wipe for Tubeless setup.
|Product Name:||Hope 20FIVE - Pro 5 - Rear Wheel - 28" | Clincher | Centerlock - 12x142mm | Shimano HG - silver|
|usage bikesport:||Road Bike, Cyclocross, Allroad / Gravel|
|hubs:||Hope Pro 5|
|shifting system:||9-speed, 10-speed, 11-speed|
|wheel size:||28" (622mm)|
|axle standard:||12x142mm (RW)|
|Wheel version:||Rear Wheel, Rear Wheel > 900g, Standard Wheel|
|Freehub Body:||HG M (Shimano 8-10s, MTB 11s)|
|tire type:||Wire Bead Tire, Folding Tire, Tubeless Ready|
|fitting tire dimensions:||28-40mm|
|inner profile width:||20mm|
|rim profile height:||25mm|
|manufacturer item code:||WHR25P5CL|