When motor assist and plus size tires meet, the range of terrain a bike can conquer grows almost exponentially. The H 1900 SPLINE 35 rear wheel is designed for that. DT Swiss has given it the reliability of a Swiss precision hub, tough spokes and a strong, yet lightweight rim to head out into unknown rides, just to see how far this new man / machine system can go. But you needn't worry: Like all DT products, passionate employees have tested the H 1900 SPLINE 35 to its limits in the notoriously rough and steep Jura mountains. To prove their reliability so you don't have to, and because it is a whole lot of fun.
27.5 inch plus rear wheel for 12x148mm Boost thru axles. With 6 bolt disc brake mounts.
The wheels of the Hybrid series are especially designed for E-MTB! Their completely reinforced hubs are optimized for highest torques and loads: largely dimensioned bodies with increased wall thickness, high strength axles, large-sized bearings, a steel freehub body, 24T steel ratchet system (rear hub) and rims with enhanced spoke holes. Thanks to a minimal increased weight the maximum system weight could be raised to a new level of remarkable 150 kg (120 kg for HXC). Finally the Hybrid System is completed with super strong straightpull spokes and Pro Lock Squorx Pro Head nipples.
Adapted rims
SPLINE® ONE wheels feature a unique rim profile that addresses the trend for wider rims in a lightweight package, but still remains durable. All wheels feature rim profiles engineered specifically to maximize the rim's material across all categories of weight, width and performance.
Tubeless ready
All SPLINE® ONE wheels are designed to be tubeless ready with the use of the DT Swiss tubeless rim tape. The rims have been carefully engineered to feature a profile that minimizes the forces applied on the rim sidewall. This optimized rim bed yields fast tire installation, and a great tire fit, allowing for quick and trouble-free tubeless setup.
Straight pull spokes
In order to achieve the ideal balance between light weight and stiffness, high-quality butted and forged stainless steel DT Swiss spokes are used in a three-cross lacing pattern on all SPLINE® ONE wheels. Stronger than conventional spokes, these straight pull spokes are still easily serviced and replaceable using standard tools.
Double Butted spokes
These spokes have two different diameters. A section of this spoke is butted through cold forging. This creates a smaller diameter. Therefore, this thinner piece allows reducing the weight while improving ductility.
Boost
Boost compatible hubs have an enhanced flange distance. This has significant advantages: a flatter spoke angle and improved symmetry allow building a stiffer and stronger wheel, always an advantage, but especially for larger diameter wheels in challenging terrain.
SPLINE® hub shell
The result of precise engineering: A lightweight, aggressive looking hub shell specifically designed for straight pull spoke use.
Two-piece hub body
All wheels feature a unique hub shell that is forged through two separate techniques. This process allows to optimize the hub shell design, maintain structural integrity and reduce overall weight without sacrificing strength. The end result is a hub shell that appears seamless in nature and special in design.
Proven freewheel technology
This SPLINE® wheelset featuring the DT Swiss 3 Pawl System® freewheel systems. This freewheel technology stands for reliability and safety.
The maximum system weight is 150 kg.
