Designed to ride faster, jump further and last longer.
The Renthal Apex combines All Mountain strength, Enduro stiffness and XC lightweight. Unique 240 degree handlebar clamps allow much of the stem body material to be removed, whilst retaining the strength and stiffness demanded by modern, wide handlebars. The Apex is fully CNC machined, featuring an oversize center bore, extensive 3-D machining and external webbing to maximize structural strength and stiffness and minimize weight. The stem body can be flipped to give either a plus 6 degree or minus 6 degree rise. This allows the correct bar height to be achieved with any wheel size or head tube length. After CNC machining, the stem components are anodized and laser marked to give a very high quality and durable finish.
Available in different length.
Features
- CNC Machined:
The Renthal Apex 35 is CNC machined from a solid billet of 2014 aluminium with 7075 aluminium clamps. These materials were specifically chosen for this application, to give the highest strength to weight ratio.
- 240 degree clamps:
The clamps are inserted over the small diameter section of the handlebar and slid into the center, giving a 240 degree wrap of the handlebar.
- Zero Gap:
The Apex 35 handlebar clamping system features a zero-gap at the underside of the handlebar. This gives superior support for the handlebar and ensures accurate bolt torque.
- +/- 6 Degree Angle:
The stem body can be flipped to give either a plus 6 degree or minus 6 degree rise. This allows the correct bar height to be achieved with any wheel size or head tube length.
- Oversize Center Bore:
The unique handlebar clamping system opens up the front of the stem, allowing an oversize center bore, to increase stiffness and strength.
- High Quality Finish:
After CNC machining, the stem components are anodized and laser marked to give a very high quality and durable finish.
Bar clamp: removable, 4 bolt
Material: 2014 aluminium body | 7075 aluminium clamps
Weight supplement: at 33 mm, manufacturer information
