Paul Component High Flange Fixed/Free Rear Hub - 10x120mm Bolt-On - polished

The High Flange Rear is a single speed hub with large diameter flanges. Many options are available for threading, axle spacing, and spoke count.

Paul Component machine these hubs from three inch round bars of 6061 aluminum. The hub shells are put through four different machining processes before they go to finishing, and the end result is something they’re very proud of. The wide flanges have six window cutouts in them to save weight and draw on the influence of classic track hubs.
The axle is ground from 7075 aluminum, which has a great strength to weight ratio. The outer lock nut faces are made of knurled steel for a solid grip against dropouts.
High-fill sealed bearings were used in the High Flange Rear, and they can be adjusted with Pauls simple adjuster ring.
The chainline on the High Flange Rear is spaced to 44 mm for the fixed cog, and 48 mm for the freewheel. The spoke holes are chamfered to reduce stress on the head and elbow of the spoke.

The hub shells are available with dedicated fixed gear threading on one side only, or in a flip-flop version with fixed threading on one side and freewheel threading on the other. Proper left-handed lock ring threading keeps fixed gear cogs secure, and Paul's heavy-duty stainless steel lock ring is included.
The ends of the axle are threaded to receive our stainless steel axle bolts. Hub Service Parts are available to convert between axle lengths.

Flange diameter: 65 mm / Center to Flange: 32.5 mm
Included in delivery: hub incl. lockring and bolt-on bolts
Material: hub body: 6061 aluminium | axle: 7075 aluminium

Weight supplement: manufacturer information