Conversion kit to change the Shimano/SRAM compatible rotor of DT Swiss 180, 240s and 350 road hubs from 9/10-speed to 11-speed.
The kit comes in the SL version and is about 15g lighter than the standard version.
To make the 10 speed DT Swiss hubs 11 speed compatible, the freehub body and the end cap needs to be replaced by the new 11 speed freehub body and end cap. After doing this upgrade, it is needed to check the dish of the wheel. It may be that the wheel is out of dish after this upgrade. An experienced dealer can re-dish the wheel or this can be done at wheels.
DT Swiss item number: HWYABX00S3184S
Caution: For the assembly of the 11-speed cassette set a broadening of the freewheel to 1.85 mm is necessary. Through the optimization process by DT-Swiss the 11-speed freewheel offered here is now 1 mm wider.
The overall width of the hub grows on to 131 mm! This provides no problem for the most frames. The wheel goes out 0.5 mm from the center, which does not really matter when driving. Exceptions might be frames where the tire clearance is already very short. Here there may lead problems in connection with 25 mm tires.
DICUT-system-wheels from model year 2011/12 can not be converted to 11-speed.
Included in delivery: Free wheel body, end cap
