Air Volume Tuning Kit with spacers of different size for an individual air spring curve adjustment of Float CTD and Float DPS rear shocks from 2013 on. For 9 mm shafts.
The set contains 5 spacers with the following volumes:
0.2 inch
3, 0.4 inch
3, 0.6 inch
3, 0.8 inch
3 and 0.95 inch
3
Changing volume spacers in the shock is an internal adjustment that allows you to change the amount of mid stroke and bottom out resistance:
- If you have set your sag correctly and are using full travel (bottoming out) too easily, then you could install a larger spacer to increase bottom out resistance.
- If you have set your sag correctly and are not using full travel, then you could install a smaller spacer to decrease bottom out resistance.
Exchanging air volume spacers at Fox rear shocks
Note: The video shows the installation of a different kind of spacer at a Float CTD BV rear shock, but the procedure is at all Float-based shocks the same. If you do not feel confident in performing this procedure, contact a FOX authorized service center.Included in delivery: set of 5 spacers