An end cap for the Syntace HiTorque MX/M 15/20 front hub or MX/M 12 rear hub.
Continuously adjustable end cap for the Syntace HiTorque MX/M front hub.
0.3 mm steel support washer and four springs for the Ratchet freewheel of the Syntace HiTorque MX/M Rear hubs.
Butted 17 mm oversize axle, intelligent bearing positioning for maximum stiffness and life span at lightest possible weight. For 12 mm thru axle.
Syntace Boost/ Evo6 Hubs with width 148mm. Comparing to 142mm hubs the flanges go respectively 3mm to the left and to the right and you get a stronger and stiffer wheel. For 12 mm thru axle.
Cover for Center Lock disc brake rotor mounts in case they are not being used.
Recommended retail price***: 21,90 €.
Handy 6-hole disc brake rotor adapter for all hubs with Center Lock mount and 9/15mm axle.
Lock Ring for Campagnolo cassettes and Campagnolo compatible rotors (freehubs).
Recommended retail price***: 19,90 €.
End pieces to convert the DT Swiss 240s Centerlock and all 180 front hubs or XM 1550 TRICON front wheels for thru axles (15x100mm) to quick release.
Recommended retail price***: 38,90 €.
Conversion kit to convert the DT Swiss 350 front hubs or X/M/E 1700 Spline, X/M/E 1900 Spline and M 1700 Tricon front wheels from 15x100mm thru axle to quick release.
Please use the following characteristics in order to narrow down your product results.
Continue by clicking "use filter" to carry out the filter