TorqTite 440C stainless steel ABEC 3 bottom bracket for BB30 shell and integrated BB386EVO 30 mm crank spindles.
The TorqTite bottom bracket is designed to replace any press fit type on the market. This means no more glue, paste or tape to try and keep things quiet. This unique and patent pending system uses a double threaded internal sleeve to tighten the right and left cups with two spanner wrenches and torque your bottom bracket tight on installation. No more movement or internal fretting of your bottom bracket against your carbon fiber or aluminum frame, just a tightened mechanical system eliminating annoying and unwanted noises. Noises and internal friction that can also sap energy and wattage output. TorqTite guarantees perfect parallel alignment between the bearings even if the frame is not perfectly straight, eliminating lost energy. The TorqTite system is the ultimate mechanical bottom bracket system to guarantee the best results with the highest wattage output and no unwanted friction.
For Cross, Mountain, or rainy muddy environments, 440C stainless steel can be a great choice to cut down on maintenance and weather the stormy rides to come. This material will not rust or corrode, and to help them last, Enduro bearings use a 4 mm diameter ball that has +50% mass compared to the competition.
Compatible with all BB386EVO cranks with 30 mm integrated axle and 68 mmm wide BB30 bottom bracket housing.
For mounting the TorqTite BBT-010 bottom bracket wrench or the matching 3/8" tool cup is required.
Case width: 68mm ||| 73mm
