SCOTT PATRON eRIDE 910 - 29" MTB E-Bike - 2022 - prism misty grey matt / black

Due to the tight supply situation for individual components, bikes may sometimes be delivered with deviating equipment. However, any alternative components used will be of a corresponding quality to that of the original components.

Patron eRIDE - Rule the trails!

The SCOTT Patron eRIDE is like a Swiss army knife: an absolute all-rounder. It brings you efficiently uphill and safely downhill. It is equipped with the latest technology and was developed as an optimized system for the most demanding trail riding. First-class integration and a carefully thought-out geometry in combination with a powerful Bosch drive unit offer much more than just riding fun. You get a great riding experience - uphill and downhill.

Features of the SCOTT PATRON eRIDE 910

• Patron eRIDE aluminum frame
• FOX 38 Performance eMTB+ suspension fork
• FOX Float EVOL eRIDE rear shock
• Shimano XT 12-speed drivetrain
• Shimano SLX 4-piston disc brakes
• Syncros Duncan telescopic seatpost
• Bosch Performance CX drive unit
• Bosch PowerTube battery with 750Wh
• Syncros Trail Fender & integrated rear light

Watch video with ID KNefbwqzMKU on YouTube.

Details of the SCOTT PATRON eRIDE 910

Fantastic support

The Patron features a revolutionary design. The rear suspension is fully integrated into the frame and allows for 160mm of travel. The integration of the suspension is more than just a design feature. It creates space for the other elements like the motor, battery and a water bottle. With TwinLoc technology, the shock can be easily accessed to lock the suspension directly from the handlebars for optimal efficiency.

Firm fit, but easily removable

The Patron eRIDE is equipped with the finest technology from Bosch and sets new standards with its 750Wh battery and 20% additional battery capacity. One of the biggest achievements on this bike is the integration of the battery. This allows a range of up to 100km or 2,000m of climbing in Eco mode or half that in Turbo mode.

Stiffness and design

The Patron eRIDE is equipped with a unique technology that optimally supports the battery. How. The battery is the heaviest element of the bike. That's why it's important that it's properly secured, yet easy to remove. The battery fits like a glove and is integrated into the main frame. This design ensures that the battery can be easily slid into the mount when needed. The cable routing is also nice and tidy.

Power when you need it

The Bosch motor comes with 85Nm and up to 340% assist, the software further enhances the natural feel of the ride. The motor is the heart of any e-MTB and that's exactly why it needs to be well protected. On the Patron eRIDE, the motor is mounted vertically and held from below. The frame thus provides the motor with the necessary protection. Since the motor of the Patron eRIDE is supported from below, its upper side is exposed - the warm air can escape upwards, like a chimney. This ventilation effect is further enhanced while riding due to the ventilation holes in the cover.

Beautifully tidy

The handlebars of e-mountain bikes are usually cluttered. A tangle of cables from brakes, lowerable seatpost, gears, drive unit and lockout. The Syncros development team therefore worked together with the SCOTT team on a neat solution to route the cables directly in the handlebars.

With just a tap of the finger

The trails are challenging enough, so keep your hands on the handlebars! For better ergonomics and a tidy cockpit, the TwinLoc lever is combined with the lowerable seatpost. TwinLoc allows you, for example, to adjust the suspension while riding. How does it work? The TwinLoc suspension system is SCOTT's proprietary suspension system that can be remotely controlled by connecting the shock, fork and ultimately the frame via the handlebars. The remote allows the rider to choose between three riding modes: Descend, Traction Control and Lockout. This simultaneously adjusts the bike's geometry, suspension and damping, and spring characteristics.

Integration

The bike comes with mudguards. Both mudguards are custom made for the Patron and allow for a sleek and perfect fit. For optimal safety, the rear mudguards are equipped with integrated LED lights that are powered directly from the battery. A cable is already routed and a plug-in connection for a front light is mounted on the handlebar. A range of Syncros accessories are available for the Patron eRIDE, such as bike stands, rear mudguards, luggage racks or mounts for action cameras.

Connectivity, flexibility and visibility

These are the keywords for the Kiox 300 Display and LED Remote. The Kiox Display is an integrated 2" color screen in the stem. It displays all the info like speed, GPS, cadence and provides a Bluetooth connection to the eBike Flow app. But you don't want a screen on your handlebar? Then simply take it off and control everything via LED Remote or your smartphone. The LED Remote displays the current charge level and allows you to easily switch between modes. The ambient light sensor automatically controls the brightness of the LEDs.