Due to the tight supply situation for individual components, bikes may sometimes be delivered with deviating equipment. However, any alternative components used will be of a corresponding quality to that of the original components.
The Rennstahl 853 Randonneur follows a long and very successful tradition. The project name of this bike was "One Bike for Life". And that already says a lot about this bike. The bottom bracket is not as high as on old-style cross-country bikes, which improves road holding at high speeds and brings the center of gravity down without bringing disadvantages off-road. In addition, hydraulic disc brakes provide optimal modulation and deceleration in any situation - whether fully loaded on fast pass descents or when riding in the rain on dusty muddy forest trails. Threaded eyelets for 3 bottle cages make the 853 Randonneur unrestricted long-distance suitable. The in-house luggage racks also contribute to this, and of course a lighting system with completely internally routed light cable.
The frame features a robust dip coating that seals the frame inside and out and makes it resistant to corrosion. Furthermore, the new Flat-Mount (FM) standard for the brake caliper mounts was used here right from the start. The wide Pressfit bottom bracket shell with BB30 dimensions in the middle allows a wide support of the chainstays on the one hand, but especially a continuous guide of the rear hydraulic lines inside the bottom bracket, without coming into conflict with the shaft.
The tire passage is large enough for up to 622 x 38mm tire width or 584 x 50mm, each in combination with mudguards. Visually as well as technically, the racing steel fork with all its eyelets is the perfect fork for this high-end steel frame. In addition, wheels with SON hub dynamo and a SON lighting system.
| Product Name: | Rennstahl 853 Randonneur - Shimano GRX - Touring Bike - 2024 |
| Manufacturer: | Rennstahl Bikes |
| Item Code: | RSB648788 |
| activity: | Cycling |
| gender: | men |
| material: | Steel |
| usage bikesport: | Trekking |
| hubs: | SON 28 | Tune ClimbHill |
| rims: | Mavic XC 1025 |
| chain: | Shimano |
| cassette: | Shimano GRX 800 |
| shifter: | Shimano GRX |
| rear derailleur: | Shimano GRX 600 |
| chainring ratio: | 40 |
| crankset: | Shimano GRX 600 |
| brakes: | Shimano GRX ST-RX600 |
| seat post model: | Ergotec | 27.2mm |
| saddle: | Brooks Cambium C17 |
| bar tape: | Selle Italia Presa Corsa |
| handle bar: | Syntace CDR |
| stem: | Ergotec | 7° |
| fork: | Rennstahl 853 Touring |
| headset: | Acros AiX-342 |
| frame: | Rennstahl 853 Randonneur |
| Shifting System (Manufacturer): | Shimano |
| gear ratio: | 11-42 |
| number of gears - front: | 1 |
| shifting system: | 11-speed |
| Shifting Actuation: | Mechanical |
| bike extras: | with Lighting System, with Fender , with Carrier |
| brake type: | Disc Brake |
| wheel size: | 28" (622mm) |
| bike lights: | SON Edelux II | SON |
| seatpost: | Seatpost rigid |
| tires: | WTB Riddler | 37-622 |
| brake actuation: | Hydraulic |
| Model year: | 2024 |
| Collection: | Full year |
| Color: | Black |
| fork construction: | Rigid Fork |
| cable routing: | internal |
| Manufacturer page: | http://www.rennstahl-bikes.de/ |
