With this set, cranks can be removed from the corresponding axles. The existing large working stroke of more than 20 mm makes the extractor tools universally applicable. Whether a pressed or a new type of crank seat screwed with stops, these Cyclus Tools pullers can solve both quickly, safely, cleanly and therefore professionally.
Furthermore, this set includes the M22x1 tap for re-cutting existing crank threads. Or with the core hole cutter M24 and the re-cutter M24x1 even a new, larger thread to cut into the crank. In order to work fast, exactly and safely, the matching guides are included in this set. These are in turn screwed into the inner bearing connection thread.
Up to now a crank was pressed and screwed on the corresponding seat. This worked due to the conical surfaces and had the consequence that when dismantling the crank only initially a puller was needed. More precisely: only to release the pressure between crank and axle. The required working stroke was very small.
But now! Especially for E-Bikes there are bottom bracket axles which do not have conical surfaces. The seat of the crank is defined only by stops and screw connections. The position of the stops is usually such that loosening or pulling them off makes new demands on the tool. This is the long working stroke.
| Product Name: | Cyclus Tools Crank Extractor and Repair Kit - M22x1 - M24x1 |
| Manufacturer: | Cyclus Tools |
| Item Code: | CYC481461 |
| activity: | Cycling |
| Workspace: | Bottom Bracket / Crank |
| material: | Steel |
| tool type: | Remover / Extractor, Cutting tools / thread cutter, Toolboxes / -sets |
| Model year: | 2024 |
| Collection: | Full year |
| manufacturer item code: | 720264 |
| Manufacturer page: | http://www.ra-co.de/cyclus-tools.html?&L=3 |
