BikeStow Fork Mount Rail - Dual - 600mm

Multiple channels enable Fork Mounts (not included) to be offset forwards and backwards, or at an angle with the bike’s handlebars turned.

The Rail must be fixed in place. You can either:

- Bolt the Rail to your vehicles cargo loop holes, by unscrewing & removing the cargo loop and use one of BikeStow Vehicle Kits to bolt the Rail to these threaded holes. These cargo loops are normally found by the rear doors in your van. In passenger versions (e.g. Caddy Life), the bolts holding the cargo loops in place may be covered by plastic trim, in which case you will need to drill-through the trim to get access to these holes.
- Screw the Rail directly to your ply-lined floor or MDF sub-floor (often under carpet) with standard wood screws.
- Screw the Rail directly to your ply-lined floor or MDF sub-floor with the BikeStow Insert Nut & Screw Kit, which allows you to frequently unscrew and remove the Rail without wearing any screw holes over time.

Features of BikeStow Fork Mount Rail:

• Multiple channels enable Fork Mounts (not included) to be offset forwards and backwards, or at an angle with the bike’s handlebars turned.
• Through-slots on each end allow you to bolt the Rail to your van’s cargo loop holes.
• Or, use the pre-drilled countersunk holes to screw directly to your floor with screws, or threaded insert nuts & bolts.
• BikeStow Tilting Fork Mounts attach to the Rail.
• CNC routed in-house from durable hexa birch plywood.
• Note: Does not include any BikeStow Tilting Fork Mounts!
• How many bikes will fit?
  600 mm Rail = 1-2 bikes
  850 mm Rail = 2-3 bikes
  1130 mm Rail = 3-4 bikes
  The “Dual” and “Triple” naming refers to how many slots are on the Rail, not how many bikes fit!