Rohloff Sprocket Tool for Speedhub Hubs with 12x135/142/170/177mm Thru Axle

Symbolic picture: shows standard version for systems with quick release.

Sprocket tool to remove the sprocket or the plug pinion adapter (Splined Carrier) from the Rohloff Speedhub 500/14 with 12x135/142/170/177mm thru axle.

The sprocket and the plug pinion adapter (Splined Carrier) of the Rohloff Speedhub 500/14 are secured to the gearbox over a six start thread. To remove the sprocket with a chain-whip, the driver must be firmly held in place. This is the job of the sprocket tool. It can be held firmly in position with a 24mm wrench. The sprocket tool is supplied with a A12 adapter/bolt.
Included in delivery: 1 sprocket tool, A12 adapter/bolt