More than 800 brands
800.000 active customers
FOX Factory

FOX Float CTD / DPS Air Volume Tuning Kit - 803-01-250

FOX Float CTD / DPS Air Volume Tuning Kit - 803-01-250

Air Volume Tuning Kit with spacers of different size for an individual air spring curve adjustment of Float CTD and Float DPS rear shocks from 2013 on. For 9 mm shafts.

The set contains 5 spacers with the following volumes:
0.2 inch3, 0.4 inch3, 0.6 inch3, 0.8 inch3 and 0.95 inch3

Changing volume spacers in the shock is an internal adjustment that allows you to change the amount of mid stroke and bottom out resistance:

  • If you have set your sag correctly and are using full travel (bottoming out) too easily, then you could install a larger spacer to increase bottom out resistance.
  • If you have set your sag correctly and are not using full travel, then you could install a smaller spacer to decrease bottom out resistance.

Exchanging air volume spacers at Fox rear shocks


Note: The video shows the installation of a different kind of spacer at a Float CTD BV rear shock, but the procedure is at all Float-based shocks the same. If you do not feel confident in performing this procedure, contact a FOX authorized service center.
Included in delivery: set of 5 spacers

Fact Sheet of FOX Float CTD / DPS Air Volume Tuning Kit - 803-01-250

Product Name: FOX Float CTD / DPS Air Volume Tuning Kit - 803-01-250
Manufacturer: FOX Factory
Item Code: FOX372811
activity: Cycling
usage bikesport: MTB
shock spare parts: Spacer
manufacturer item code: 803-01-250
Manufacturer page: http://www.ridefox.com