With the Tune Tool 08 toolset you can service all Tune hubs and exchange bearings, axles, freehub bodies and more. It includes the base tool with different stands, axle extractors and bearing tools.
For detailed service steps and needed tools please consult the service manual available for your hub.
For specific manuals please visit the Tune website.
Content of the Tune Tool 08 toolset:
- 1) WZ0200 base tool
(for all Tune hubs)
- 2) WZ0202 drift punch long for Ø 15 mm axle
(Mig45, old Ø 15 mm axle hubs until 2011)
- 3) WZ0201 adapter Ø 16.5 x 65 mm for drift punch long Ø 14.5 mm
(for all current hubs since 2011)
- 4) WZ0219 drift punch for QR15 axle
(KINGKong, Princess, Boost)
- 7) WZ0206 cap for the basic tool, for dissasembling the axle
(Mag150 with Ø 15 mm until 2011)
- 8) WZ0205 cap for the basic tool, for dissasembling the axle
(for Mig45 hubs)
- 9) WZ0204 cap for the basic tool (baseplate to adjust bearing clearance)
(for axles)
- 11) WZ0210 assembling stamper Ø 19.5 x Ø 32 mm, for 61804 2R bearing
(for KINGkong MK hubs)
- 12) WZ0217 assembling stamper Ø 16.8 x Ø 29.8 mm for 61903 2RS bearing
(right behind hub bearing)
- 14) WZ0209 assembling stamper Ø 16.5 x Ø 26 mm, for 61803 2RS bearing
(for freehub, left behind hub bearing)
- 15) WZ0208 assembling stamper Ø 14.5 x 24 mm, for 61802 2RS bearing
(for Cannonball and Mig45 hubs)
- 16) WZ0220 assembling stamper Ø 24.8 x 37 mm, for 61805 2RS bearing
(for Cannonball hubs)
- 17) WZ0221 assembling stamper Ø 27.3 x 37 mm, for 61805 2RS bearing
(for PS hubs)
- 18) WZ0225 support tool
(for 17 mm bearings)
- 19) WZ0223 stick for dropout removal, stainless steel
(for end caps)
- 21) WZ0222 force fitting plunger Ø 25 x 37 mm, for 61805 2RS bearing
(for Cannonball hubs)
Included in delivery: see description