Tatze LINK Flat Pedals - black

Ultra-thin Flat Pedal

The Tatze LINK pedal is an extremely thin Flat pedal. The large platform with 113x99mm and 20Pins with targeted elevation provide enormous grip and a good connection between pedal and shoe. To further increase the grip and maximize the contact surface, an additional 4 pins per side can be screwed in. Unwanted contact with the ground is avoided by the LINK through its extremely thin design, so the pedal body has only 8.8mm at the exposed outer edge, making the LINK one of the thinnest pedals on the market. The open design allows dirt to fall through the pedal and makes the pedal lightweight at only 343g.

The LINK has a high-quality bearing, a IGUS JSM plain bearing and two ball bearings are used. In addition, bearings and seals can be replaced in minutes with the optionally available Refresh-Kit to set the clock back to 0.

Specifications of the Tatze Link platform pedals

• Concave flat side with 10Pins (max. 14Pins possible)
• Large platform with specific elevation of the PINS
• Pedal body made of 6061-T6 aluminum
• CrMo axle
• Bearing: plain bearing and 2x ball bearing (multiple sealed)
• Designed and tested in Tyrol/Austria

Scope of delivery: incl. spare pins with key