Tight-fitting, lightweight and water and wind resistant overshoes.
Just like the well-known overshoes made of natural rubber, the silicone overshoes are well protected against damage during use by recesses in the cleat and heel areas - although contact with sharp objects must be avoided at all costs. The brand-new silicone version not only offers the same protection against wind and moisture, but is also much easier to put on thanks to the press studs on the underside. Perfect for the cold season, the silicone material warms slightly more than the rubber version.
Putting on the shoes is similar to putting on neoprene overshoes: Put on the overshoe, put on the shoe, put the overshoe over the shoe and "snap" on the underside. After use, the overshoes can be easily cleaned with a damp cloth and hung up to dry. It is advisable to powder the overshoes with talcum powder, this prevents them from sticking together and helps immensely when putting them on again.
1. put on socks.
2. put on the overshoe like a sock.
3. put the foot through the large pedal plate opening and put on shoe.
4. pull cover over the heel of the shoe, then toes.
5. straighten overshoes. Make sure that no part of the overshoe is over the pedal plates or heel caps. Make sure that the overshoe is on the skin and not over the sock, otherwise water can get in.
Attention: The overshoes can tear if you do not put on the overshoe first and then the shoes.
To prevent water from entering the shoe from the underside, remove the insole from the shoe and stick tape over the ventilation opening. Avoid contact with sharp objects. Do not store in direct sunlight.
|Product Name:||veloToze Silicone Snap Road Shoe Cover - Tall - white|
|usage bikesport:||Road Bike|
|Features:||Windproof, Water resistant, Waterproof|
|temperature range:||+5°C / +16°C|
|shoe cover version:||Aero|
In the following tables you will find information on the dress sizes of the manufacturer .
|International||S / M||L / XL|
|EU||37 - 42.5||43 - 47|
International S / M
International L / XL