Praxis Works M30-Thru T47 Bottom Bracket Internal - T47-85.5/89.5-M30-Thru

The Praxis Works bottom bracket has a housing made from heat-treated and forged aluminum and is suitable for both MTBs and road bikes. It is compatible with T47 frames and various cranksets with an M30 axle. The sealed bearing ensures durability and low-friction running.

Technical details of the Praxis Works M30-Thru - T47 I.B. bottom bracket

• Area of application: Road bike, MTB
• Material: forged aluminum (housing), steel (cartridge bearing)
• Bottom bracket: T47 I.B. (internal)
• Housing width: 85.5mm - 89.5mm
• Axle profile of the crank: M30 (30mm/30mm)
• Steel industrial bearings

For example Compatible with:

• RaceFace/Easton Cinch
• CaneCreek
• Rotor Rex/3D+

Note from the manufacturer

Refer to the manufacturer's instructions supplied with your crank model to determine the correct setup. Praxis supplies 2mm dust caps for each side as a basic setup, but each brand has its own specific crank setup. Depending on the crank, you may need additional spacers.

Recommended tool:

• Praxis Works M30 BB Tool (TP-3028)
• 3/8 inch torque wrench or the M30 BB Tool (TP-0330)

Scope of delivery

Bottom bracket consisting of housing with cartridge bearing, spacer sleeve and 2 dust caps