Alugear AERO Chainring - Road/Gravel | Direct Mount (SRAM 3-Bolt) | 1x 10/11/12s - oval | black

Technologically solid, extremely light and unique in design. These properties characterize the chainrings from Alugear. And the AERO chainring for 1-speed cranks with SRAM 3-Bolt mount is no exception.

Not only the wealth of experience of the Alugear engineers, but also extensive tests have contributed to a considerable weight reduction without having to make any significant compromises in terms of impact resistance. Both the optimized arm design and strategic machining of the CNC-milled aluminium chainring are responsible for this. Meanwhile, the Narrow/Wide tooth profile ensures smooth chain running by keeping the chain securely in position at all times.

Visually, the chainring stands out with the AERO look typical of Alugear. To maintain this look for a long time, the chainring has an industrial hard anodization, which noticeably increases the protective effect against mechanical impacts. The unique tooth profile also contributes to increased wear resistance. In addition, it eliminates chain noise to ensure smooth operation of the entire system.

Technical details of the Alugear AERO chainring

• range of use: road bike, Gravel
• material: aluminium 7075-T6 (CNC-milled, hard anodized)
• interface: Direct Mount (SRAM 3-Bolt)
• tooth profile: Narrow/Wide
• offset: 6 mm (round 38-52T / oval 38-50T) / 5.5 mm (round 54T / oval 52T) / 4.5 mm (oval 54T)
• ovality / timing: 12 % / 108° (top dead center)
• outer diameter (38 / 40 / 42 / 44 / 46 / 48 / 50 / 52 / 54 teeth):
  161.3 / 171 / 179 / 187 / 195.5 / 202.4 / 210.4 / 219 / 227 mm (round; manufacturer's specification)
  170 / 178 / 186 / 194 / 202 / 210 / 218 / 226 / 234 mm (oval; manufacturer's specification)
• weight (38 / 40 / 42 / 44 / 46 / 48 / 50 / 52 / 54 teeth):
  approx. 101 / 108 / 115 / 126 / 134 / 143 / 161 / 175 / 181 g (round; manufacturer's specification)
  approx. 93 / 104 / 110 / 123 / 130 / 138 / 151 / 170 / 176 g (oval; manufacturer's specification)

Compatibility:

• 1-speed cranksets with SRAM 3-Bolt interface
• compatible with Cane Creek eeWings All-Road cranks
• chains from SRAM (Flattop™, 12-/11-/10-speed), Shimano (12-/11-/10-speed), Campagnolo and KMC

For the best possible chain retention, the manufacturer recommends using a rear derailleur with a clutch system.

Scope of supply: 1 chainring