Schwalbe Clik Valve - Tubeless Valve - Set of 2 - 80 mm

With the SCHWALBE CLIK VALVE, pumping up the bike valve is very easy - with just one click. The SCHWALBE CLIK VALVE can be operated with one hand and is child's play to use. What do you need? The valve and the corresponding pump head or pump head adapter. The Clik valve can be clicked onto the bike valve with minimal force and removed very easily after successful pumping. The Clik Valve tubeless valve even has an additional advantage: a 50% higher airflow than conventional tubeless valves. It thus combines several advantages.

Features of the Schwalbe Clik Valve tubeless valve

• The valve insert and the pump head or the corresponding adapter together make inflation child's play.
• There is no longer any risk of air loss and there are no signs of wear on the pump head. 
• Reverse compatibility: The Schwalbe Clik Valve can also be inflated with normal SV (Presta) pumps.
• It can be operated with just two fingers and is extremely simple for everyone. 
• The air flow in conjunction with tubeless is 50% higher than with conventional SV valves.
• Conversion kits for all common bicycle valves & adapters for car valves are available 

Scope of delivery:

2x Schwalbe Clik Valve tubeless valves

Easy inflation thanks to new valve system

It's finally here: the long overdue development that makes inflation easier for everyone! The SCHWALBE CLIK VALVE (SCV) is THE revolution for bicycle valves and solves problems that have existed for over a century.

In terms of usability, it sets completely new standards. Because with the SCHWALBE CLIK VALVE, inflating the bicycle tire is now as simple as possible - with a click. The SCHWALBE CLIK VALVE can be operated with just one hand and is suitable for everyone: from the youngest adventurers to the most experienced cyclists. It's love at first CLIK!

This is Clik Valve

The principle of the SCHWALBE CLIK VALVE, winner of the Eurobike Award 2024, is very simple: it works intuitively with a click. What does it need? The valve and the corresponding pump head or pump head adapter. With the Clik Valve, this can be clicked onto the bike valve with minimal force and removed again very easily after successful inflation.

It doesn't matter which valve and pump you currently have - thanks to conversion kits for all existing bicycle valves and most pumps. To change the bicycle valve, simply replace the valve insert (Sclaverand, Presta, Dunlop, tubeless valve), for the car valve there is an adapter that is screwed over the valve (and can be easily unscrewed again to be able to use petrol station pumps).

The pump head adapter can be integrated into the pump head of current pumps (by clamping or screwing in), even with hand pumps. The Schwalbe Clik Valve can also be inflated with normal SV (Presta) pumps - thanks to this reverse compatibility, you are never at a loss in any situation. And SKS will already be offering its own CLIK VALVE pump at Eurobike.

The Clik Valve is produced by the Italian specialist valve manufacturing company Record S.p.A. Schwalbe will soon be producing the first tubes with the Clik Valve.