SRAM PressFit BB121 GXP Fat Bike Bottom Bracket MTB PF41-121-GXP

PressFit bottom bracket design is a variant of the external bottom bracket. Instead of threading bearing cups into a frame, the bearing cups are simply pressed into the frame. With PressFit, there is no change to the crank - the spindle length and diameter remain the same.

With PressFit you get the weight and strength advantages of BB30 and the simplicity of PressFit technology. The key difference between PressFit and BB30 is how the bearings are fitted into the frame. PressFit bearings are housed in nylon cups, which are simply pressed into the frame's bottom bracket shell. There are no snap rings required! No more spacers or wavy washers! The PressFit GXP system is designed for SRAM GXP spindle cranksets and requires a 41mm inner diameter bottom bracket shell and 121 mm case width. Advantages of the bottom bracket system are the lighter weight, greater bearing durability and stiffness, easier installation and adjustment.

Note: The PressFit GXP bottom bracket is only compatible with bicycle frames constructed for the PressFit bottom bracket standard.

Symbolic picture: The image shows SRAM PressFit BB92 GXP Bottom Bracket MTB.
Case width: 121mm