Hot WAX Warmer for Chainwax - 500 ml
The Warmer is ideal for all types of chain waxes. It melts any type of wax, including wax beads and wax blocks.
Details
- Capacity: 500 ml
- Voltage: 220-250V
- Frequency: 50/60 Hz
- Temperature range: 0-120°C
- Inner container made of aluminum
Use
- Connect the device to the power supply.
- Remove the plastic cover from the warmer. Add wax from the can or wax drops to the warmer.
- Switch on the heater, set the temperature unit (°C or °F) and adjust the temperature until the wax melts. This process takes about 15 minutes. To speed it up, close the warmer with a lid. The higher the temperature of the wax, the faster it melts.
- Once the wax has melted, reduce the temperature,
- It is important to check the temperature of the wax before applying it and adjust if necessary. The wax must not be too hot or too cold.
- Continue treating the chain.
- After finishing the treatment, remove the wax can from the device, switch off the device and then cover it with the lid.
- If you clean the device with a special agent after disconnecting it from the power supply, when it is still slightly warm. Caution! The inner container and wax are hot after melting! Danger of burns!