Praxis Works M30-Thru Road Ceramic Bottom Bracket - BB30/PF30-68-M30-Thru

High-quality ceramic bottom bracket for Praxis Works 30mm M30-Thru crank spindles on BB30/PF30 frames.

The bearings have a 30mm diameter for the crank spindle on both the drive and non-drive side. This means that cranks with 30mm spindles from other manufacturers such as Race Face, Easton and Rotor also fit.

The bottom bracket is equipped with high-end Enduro Ceramic bearings. These are very well sealed, run smoothly and ensure maximum reliability.

The Praxis Works M30-Thru bottom bracket uses the specific Collet design and requires a press-fit tool and two M30 bottom bracket keys. It fits both BB30 frames with a 42mm housing diameter and PF30 frames with a 46mm diameter. Thanks to the sophisticated design, it sits absolutely securely and firmly without creaking.

• Crank spindle: M30-Thru - 30mm continuous
• Housing width: 68mm
• Case diameter: BB30: 42mm / PF30: 46mm
• Type: BB30/PF30
• Ceramic bearing Grade 5 / Abec 5