Praxis Works M30-Thru BB386 EVO Road Ceramic Bottom Bracket - PF46-86.5-M30-Thru

High-quality ceramic bottom bracket for mounting road bike cranks with 30mm Praxis Works M30-Thru spindle in frames with BB386 EVO bearing seat.

• Injection-molded bearing shells for Pressfit 386EVO
• Housing width: 86.5mm
• Cartridge ceramic ball bearing

Also suitable for cranks from many other manufacturers, such as RaceFace/Easton Cinch, CaneCreek or Rotor "Rex/3D+, which have 30mm drive side / 30mm non-drive side bearings.

The bottom bracket is equipped with high-end Enduro Ceramic bearings. These are very well sealed, run smoothly and ensure maximum reliability.

A press-fit tool (e.g. Park Tool HHP-2 or HHP-3) is required for installation.