Stashed SpaceRail Bike Storage System Rack Mount - 4 Hooks

Purpose-built for commercial use, Rack Mount integrates SpaceRail with existing warehouse racking systems. It’s the go-to for bike rental fleets and busy workshops, offering easy access, scalable capacity and no-fix installation. Reconfigure your layout as needed—this system moves with your business.

Features of the Stashed SpaceRail Bike Storage System Rack Mount - 4 Hooks

• Rack Mount works with a wide range of pallet racking systems
• Rack Mount is designed to fit most beam widths of 40mm / 1.5" & 50mm / 2" - beam heights from 50mm / 2" to 165mm / 6.5"
• Rack Mount is an easy to install, convenient no-fix, movable and removable bike storages system
• Save up to 50% space storing bikes using Rack Mount and SpaceRail
• SpaceRail Rack Mount kits are designed for use in commercial and warehouse settings
• Each rail section can hold 100kg / 220lbs
• Universal hook stores every bike up to 30kg / 65lbs (3” tyre max) including e-bikes, with or without mudguards
• FA[S]T adapter available for tyres wider than 3” and 60mm+ carbon wheels (purchased separately)
• SpaceRail Rack Mount Bike Storage is infinitely extendable to store every bike in your fleet
• Improves security - compacting bikes makes them easier to secure
• 5 year commercial no-quibble manufacturer's warranty

Technical Specs of the Stashed SpaceRail Bike Storage System Rack Mount - 4 Hooks

• Rack Mount works with step type beams and box beams. Stashed do not recommend fitting to Z-section or L-section beams
• Rack Mount is fully adjustable to suit most types of racking: Min depth - 900mm / 35.4".max depth - 1250mm / 49.2"
• Designed to fit beams with a depth of 50mm / 2" to 165mm / 6.5" and width of between 40mm / 1.6" to 50mm / 2"
• Any height of racking can be used, as long as it can be adjusted to fit the length of the longest bike being stored. Stashed recommend a height of 2,500mm 100" to allow for most bike lengths
• Ensure you have sufficient height to hang your bikes with the wheels off the floor. The rail and trolley require 205mm / 8.1" of height allowance from the tope of the rail to the inside of the bike's wheel rim where it touches the hook
• The adjustable rubber pressure pad can be positioned 10mm / 0.4" to 60mm / 2.4" from the top surfaces of the beam
• Stashed recommend using two beams at the top and one at the back unless access from the rear is required
• Rack Mount is designed to work with a wide range of commercial pallet racking systems. It is the user's responsibility to ensure that the structure they are using is capable of supporting the load
• Rack Mount is made from powder coated mild steel