Weber Drawbar Connector with Lock - round - 25,4mm - DA.07.030.01

With the Weber connection piece for round drawbars, many trailers can be converted to the convenient and secure bayonet lock system. The way the lock works is comparable to that of a camera lens. The coupling and the connecting piece are firmly and precisely connected by plugging together and twisting a locking bolt. The possibility of locking the Weber couplings and thus protecting the coupled trailer from theft is particularly practical in everyday use.

Note: To ensure that your trailer can be securely attached to a WEBER coupling, you need the appropriate WEBER drawbar connection.

Technical data:
Suitable for unbraked and braked bicycle trailers for transporting loads and children. Not approved for motorized use!

Permissible total weight of the trailer: up to 80 kg.
Permissible static drawbar load at the coupling point: up to 6.5 kg.

Attention!
To fit the drawbar, you will need 2 open-end wrenches and/or ring wrenches with a width across flats of 10 mm. In some cases, a drill, drill bits with a diameter of 6 mm and 3.2 mm and a metal saw or pipe cutter are also required!

Inexperienced persons may be at risk of injury during installation! The manufacturer therefore recommends that installation should only be carried out by trained specialists!

Scope of delivery:

1x drawbar connection
1x drawbar foot
1x safety strap
1x bolt with self-locking nut
1x information sticker
1x assembly instructions