Y-Mount Bundle: Y-MOUNT + Stabilizer Fork - 7x7mm

Y-MOUNT - The innovative 4-point saddle rail mounting system

Y-Mount
Suitable for most saddle models, weighs only 31g and carries up to 6kg. For the simple and stable mounting of saddle bags, bottle holders, stabilizers, rear light holders and other Y-mount products.

The Y-MOUNT is clamped on the saddle rails and is extremely stable and resilient thanks to its unique 4-point design (patent pending). Thanks to its low weight of just 31g and its aerodynamically optimized shape, it can remain permanently on the bike and serves as a stable mount for bags, bottle cages and other accessories. The ultra-light and resilient mounting solution for high-end bikes.

Stabilizer Fork
The Stabilizer Fork is a real all-rounder. It is used both to attach our Y-Mount Saddle Bags and to stabilize saddle bags from other manufacturers.

The Stabilizer Fork is attached to the Y-Mount with two titanium screws and effectively prevents saddlebags from swinging or rocking. The strap supplied is long enough to cross under the bag, which leads to optimal stability even for heavily loaded bags. Instead of the strap attachment around the seat stays that is usual for saddlebags, the Stabilizer Fork takes the weight.

Optionally, you can attach a sleeping bag or dry bag to your bag thanks to the long holes at the ends of the forks.

Features Y-Mount

• universally suitable for round and oval seat stays (carbon, titanium, steel)
• stable and safe thanks to 4-point clamping
• quick change of bags and accessories
• manufactured in 3D Layup Carbon technology
• polished visible carbon surface
• aerodynamically optimized design
• Grade 5 titanium screws for maximum strength

Features Stabilizer Fork

• suitable for many saddlebags (e.g. Ortlieb, Apidura, Cyclite)
• weight 31g (including titanium screws)
• grade 5 titanium screws for Y-MOUNT assembly
• manufactured in 3D layup carbon technology
• polished visible carbon surface
• possibility to attach a drybag or sleeping bag on top

Technical Data

Y-Mount:

• material: carbon fiber, manufactured in 3D layup technology
• weight: 31g
• max. load capacity: (depending on accessories): 6kg
• screws: titanium Grade5, Torx T20
• material yokes: AL7075

Note: The variants for round and oval saddle rails only differ in the screw lengths. The variant for oval saddle rails (7x9mm / 7x10mm) also fits round saddle rails (7x7mm), but then the screws protrude a little. Y-Mount offers screw sets for oval and round saddle rails separately, so that you can also convert your Y-MOUNT later.

Stabilizer Fork:

• material: carbon fiber, manufactured in 3D layup technology
• surface: visible carbon, polished
• weight 31g
• maximum load capacity: up to 6kg (depending on the weight distribution of the bag)
• screws: titanium G5, Torx T20
• fork ends: for 12-15mm belts
• strap: 15mm, length 170mm
• compatible with many saddlebags (e.g. Ortlieb, Apidura, Cyclite)

Included in delivery:

• 1x Y-MOUNT
• 1x Stabilizer Fork with titanium screws
• 1x ultralight strap